P4c800-e volt mod and droop mod needed?

[sierra248]

Well I've been playing around with this thing all week and here is what I've decided to leave it, as its stable for 72hours at 100% CPU usage with CPU temps never climbing above 108 Degrees(42 Degrees Celcius). This is the highest OC I can do without going over running over 1.7volts. I'm a little disappointed with the overclock as I paid allot for this SL6Z5 but it runs good and stable.

Asus P4c800-E with P4 2.8C SL6Z5
Antec 430Watt with 2 fans
2x512 OCZ PC3700EB
Antec p160 Aluminum Case
Thermalright SP-94 with 92mm Tornado(Artic Silver)
Thermalright NB-1 with small fan that came with it(Artic Silver)
120MM Stealth Front Intake Fan
120MM Stealth Rear Exhaust Fan

.

Configuration System Frequency/Voltage

AI Overclock Tuner @Manual
CPU External Frequency @230
DRAM Frequency @400 Mhz
AGP/PCI Frequency @66.66/33.33
CPU Core Voltage @1.6000Volts
DDR Reference Voltage @2.85Volts
AGP VDDQ @1.60V
Performance Mode @Turbo


CPU INFO

CPUID Maximum Value Limit @Disabled
Hyper Threading Technology @Enabled


Advance Memory

Configure DRAM Timing by SPD @Disabled
DRAM CAS Latency @3.0 Clocks
DRAM RAS Precharge @2 Clocks
DRAM RAS to CAS Delay @3 Clocks
DRAM Precharge Delay @5 Clocks
DRAM Burst Length @4 Clocks
Performance Acceleration Mode @Enabled
DRAM Idle Timer @AUTO
DRAM Refresh Rate @AUTO

Graphics Aperture Priority @AGP/PCI
Graphics Aperture Size @128MB
Spread Spectrum @Enabled

ICH Delayed Transaction @Enabled

MPS Revision @1.4


Advanced PCI/PnP Settings

Plug and Play OS @YNo
PCI Latency Timer @64
Allocate IRQ to PCI VGA @NO
Pallette Snooping @Disabled
PCI IDE Busmaster @Enabled


Anyone see anything wrong with that? It runs good and Seems to benchmark well. I have no way of posting screenshots right now but I will ASAP. Here is what I get from the Sandra Memory Bandwidth Benchmark:
RAM Bandwidth Int Buff'd iSSE2 = 447MB/s RAM Bandwidth Float Buff'd iSSE2 = 5421 MB/s

3dmark2003 = 1955 with Geforce 4 ti4200 @300/600 MHZ (I know that sucks, new video card coming soon)

Well any comments or suggestions would be greatly appreciated, I'm dissapointed that I couldn't run DDR500 as I had expected but Maybe I'll get the OCZ Booster and run 2.5-2-2 and speed it up a little more.

Thanks Guys its finally done
Tom