• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

P45 MB recommendation

taroumaru

Weaksauce
2FA
Joined
Dec 22, 2005
Messages
89
P45 MB recommendation


Need recommendation on a new MB, P45 possibly, don't think I'll be getting any X48! Something stable & hopefully
with a mature BIOS, able to OC some & use all 4 RAM slots! Also need memory remapping, don't want to lose 512-
768 MB of physical RAM addresses to bus & peripheral addresses.

Need atleast 8 SATA ports [10 will be even better, but the 4 extra SATA borts on the ASUS/Gigabyte MB's are based
on Sil5723 controller & doesn't recognize ATAPI/optical drives!] At least 1 eSATA, for future expansion; 2 will is
even better.

* RANT *
ICH10R, for all the stuff Intel did to update the P35 to P45, including PCIe 2.0 & a node shirnk to 65nm they left
the south bridge virtually same as ICH9R! 6 PCIe 1.1 lanes connecting all the preipherals, any 4x PCIe slots, +
any 1x PCIe slots, the whole plethora of 8-10 SATA + any eSATA ports, any number of 2-4 LAN chips + the audio, &
the whole legacy PCI bus, all this connected with a measly 2 GBps NB-SB link, called DMI or whatever!

You gotta hand it to nVidia in this case, 28 lanes in the south bridge alone & its connected to the NB with HT too!
* RANT *

Rest of the hardware I'm getting is listed as below:

-CPU - Q9450
-Cooler - I already have a Xigmatek HDT-S1283, the extra shiny things [heatpipies & sinks] around the CPU won't
make this thing useless junk.
-RAM - 8GB [4 x 2GB] DDR2-1066 Patriot or G.Skill. Will I be able to run all 4 modules at 1066/1000 in 2 dual
channel mode? It's ok if can't do 1000/1066 with all 4 slots, however I still need 8GB as I plan on using VMware.
-GFX - HD4870 or a HD4850 [the ones that I looked at, none seem to come with a HDMI port, they all need DVI->HDMI
converter & no DisplayPort either!] Also not planning on doing any CF, atleast not anytime soon.

I have looked at some Gigabyte & ASUS MB's, but not familiar with DFI's current P45 [or P35] boards, don't know
much about FoxConn other than their recent record setting FSB & abit just went down under! So, please make your
recommendation.

I looked at the following boards

ASUS P5Q Deluxe--
-ADI AD2000B audio; for a almost $200 board you'd think they'd put in a high end Realtek if not an X-Fi, one of
those 7.1+2 chips that can playback multiple streams through different ports, also DTS/DD, I forget which.
-Marvell 88E8001 Gbit / PCI; this LAN chip is on the PCI bus, hence besides pegging the CPU to death, will barely
do 400MiBit/s; what was the point of putting 2 LAN anyway if one of them are going to be a carppy one; the other
one is a PCIe Marvell 88E8056 Gbit chip.
-Sil5723; 2 extra SATA ports but these boards doesn't recognise/work with ATAPI optical drives attached to them,
& I need at least 8 SATA ports that will all work with ATAPI devices!
-1 PS2 port; I mean wtf? What exactly am I supposed to do for a mouse, I also doubt my KVM will work with a PS2
splitter!

ASUS P5Q Premium--
-ADI AD2000B audio; same as previous asus board.
-4 Gbit LAN; all PCIe but wheres all that extra lanes coming from? Nowhere; its all being shared with the 6 PCIe
1.1 lanes in the SB.
-Sil5723; 4 SATA ports but same problem as above, no ATAPI support.
-1 PS2 port; same as above.


GIGABYTE GA-EP45-DS3R--
+Realtek ALC889A audio codec; one of the best on board solutions.
+Realtek 8111C Gbit / PCIe x 2; actually also one of the best PCIe Gbit LAN chips.
-Only 6 SATA ports, also no eSATA.
?Dont know if memory remapping is supported.

GIGABYTE GA-EP45-DQ6--
+Realtek ALC889A audio codec; one of the best on board solutions.
-Realtek 8111C Gbit / PCIe x 4; good LAN chip but wheres the bandwidth coming from; SEE BELOW!
-4x PCIe slot x 2; well these 2 slots have a PCIe switch that lets them share only 4 PCIe 1.1 lanes & that too with
the 4 Realtek Gbit LAN's!!!!!!
-Sil5723; 4 SATA ports but same problem as above, no ATAPI support. [& no eSATA.]
?Dont know if memory remapping is supported.


Well thats about all I can do for now, so please make your recommendation for other ASUS/DFI/Foxconn/Gugabyte board.

Thanks.
 
http://www.newegg.com/Product/Product.aspx?Item=N82E16813138118

only 6 sata ports, 2 esata. guys are getting 600 ish fsb with quads on air. 700 ish with duallies.



http://www.newegg.com/Product/Product.aspx?Item=N82E16813136053

this is the revised version of the dk p45. has 8 sata but no esata. think i got the first one, to replace my non plus version. will be here tomorrow, i will let you know.

http://www.madshrimps.be/vbulletin/...45t-extreme-air-cooling-659mhz-reached-46676/

i am not recommending this one ( i dont recommend gigabyte mb) but its definitely the most expensive p45 board at around $340.
 
vanilla_guerilla, thanks for replying. Yeah can't use the Bio, not enough SATA ports on the MB; it does have nice aodio/LOM chips tho. Very nice, color LED lit & large reset+power switches; no CMOS Rst switch tho.

The dk+ has ok LOM/ausio chip, but that NB heatpipe-sink combo looks like it might be a problem installing the Xigmatek HDT-S1283 on this. Has reset/power buttons on the PCB, though, wish the CMOS Rst was also there. Let me know how this thing goes when you get it tomorrow.

Also does the Bio/DFI has memory remap option in BIOS, do you know?

LMAO! That 340+ Gigabyte is utter BS; only 6 SATA porta for that much dough, not to mention its DDR3, 2-3x as expensive as DDR2!
 
The P5Q series is very solid, if you want to save some money you could look at the P5Q-e it seems to have everything you need.
 
I'm using the GIGABYTE GA-EP45-DS3R--

It comes with an expansion card that allows for 2 esata and power for the esatas. I really lvoe my mobo
 
thats why i didnt recommend an asus. i am experienced in fixing these asus boards, and after reading your thread i suggest that you
105843672_1dfe6cbaac.jpg
 
Back
Top