I'm looking at someones dell 3000 that isn't working. After testing the power supply in it that had been replaced with a 400w and the original 250w that was in it; both were fine with a volt meter. I dug deeper and discovered that the power switch was good, but the cpu itself was removed.
when I pulled off the heatsink The cpu came off with it
Wow thats a whole lot of pins bent over
so I proceed to straighten out these pins with a needle,tweezers and a magnifier and discover one missing. With a little wigglin I got it back together. Well long story short I do not have a Flat panel monitor yet and no adapter so it seems as though I don't have video with crt hooked up. No visible post but everything seems to boot.
Is there a pin missing on this cpu or just on mine?
Could you steer me to a place that tells me what I lost on this cpu?
Trash---- or put processor in a real mobo and use a piece of wire?
Wow thats a whole lot of pins bent over
Is there a pin missing on this cpu or just on mine?
Could you steer me to a place that tells me what I lost on this cpu?
Trash---- or put processor in a real mobo and use a piece of wire?