• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

P4, faulty?

D

dunkindan

Limp Gawd
Joined
Apr 29, 2003
Messages
300
Usually if your processor is not connected properly it will beep. My computer does not beep unless i take the processor completely out. Can the processor still be detected and faulty, therefor not beep?
 
Or it could be the board doesnt like the proc, might need a bio update or the proc is to fast. It could also be a ram or PSU issue.
 
weve used two different mobos and also 3 diff vid card (agp,pci) And we still cant get a video signal. Tried 3 diff types of pc2700 ram as well. Ive previously built a computer with the same exact components so I dont know the problem.
 
Well if it doesnt work in a board you know is good then it has to be bad.
 
Do you have access to another chip? try a known good chip in the board see it it boots. If it doesnt obviously you are doing something wrong. If it does boot up then you have a bad chip.
 
What speed is this P4? Some boards will not let you boot if it is a 800FSB processor with 2700ram.
 
You must log in or register to reply here.
Back
Top