• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

p4 2.4 oc?

L

LogicSound

Limp Gawd
Joined
Jul 24, 2005
Messages
241
trying to oc my p4 2.4c non ht, northwood, i have 3x512mb ddr pc3200 2-2-2-5-1 timming with kingston hyper x ram. i can run 2.8 no problem when going to 3.0+ ghz it doesnt want to go. meaning i get system 32 error settings are agp pci 66/33 fixed ram timing 2-2-2-5, psb cpu nsb strappe to cpu. im using abit ic-7G max II my mulitiplier is locked @ 18x156 2808ghz anyone suggest any timings/settings?
 
that means you're using P4 2.4Ghz with 533FSB? these are not so OC-able

Also you're indicating you're running 3 DDR? are you running at single channel mode?
 
it sounds to me like you have your processor pretty much tanked out. voltage/cooling is all you have.
 
yes single channel mode. 3x512mb pc3200 hmm well which. well maybe i''ll look into getting another chip down the road. thanks guys.
 
Carefull raising the vcore because those P4's were prone to SNDS.
 
and you might wanna change thermal TAKE to thermal RIGHT in ur sig :p
 
You must log in or register to reply here.
Back
Top