irongiant14
n00b
- Joined
- Nov 15, 2003
- Messages
- 35
I am troubleshooting my uncle's DFI P2XBL Rev. D1 based PIII 450 computer. I know it's old but he only uses it for accounting. It posts but does not detect anything on either IDE channel, HDD or CD-ROM.
I thought the 8GB Samsung HDD died, so I replaced it with a new Maxtor 40 GB from newegg. But it doesn't detect that, either. There is a short "brrp" sound before the start routine hangs as it searches. I went into BIOS and tried to manually detect the drive but it hangs there, too.
I tried to update the BIOS, in case the new HDD was bigger than the old mobo could handle, but even with the current BIOS set to enable booting from floppy: and A: set first in cue, the computer hangs trying to find an IDE drive.
I'm at the end of my rope. Can anyone shed light on this behavior?
I thought the 8GB Samsung HDD died, so I replaced it with a new Maxtor 40 GB from newegg. But it doesn't detect that, either. There is a short "brrp" sound before the start routine hangs as it searches. I went into BIOS and tried to manually detect the drive but it hangs there, too.
I tried to update the BIOS, in case the new HDD was bigger than the old mobo could handle, but even with the current BIOS set to enable booting from floppy: and A: set first in cue, the computer hangs trying to find an IDE drive.
I'm at the end of my rope. Can anyone shed light on this behavior?