Overclocking Throughbred 2600+

[Sk8er_Square]

If i ever get past the incorrect temperature issue, im looking at running my chip at 3200+ speeds or higher, to give the best support for my x800.
What should i set the Vcore and FSB multiplier to?
I have 512mb kingston ram what should my timings be?

Because this isnt a barton, i fear i will have alot more troubles getting those higher speeds, at the moment its running the stock multiplier settings...and a vcore of auto (putting it on 1.5)

 

[Elian]

you're not going to just overclock it to the highest speed its possible, you have to overclock in small increments, stay with stock voltage, and overclock your FSB by 3mhz (or multi if its unlocked) once it becomes unstable, up the voltage, then repeat the FSB until you get to a good stability/speed

 

[scottatwittenberg]

like the last guy said.. small increments.. is it unlocked? or can you unlock it? what is the stock voltage, multi, fsb?

 

[Sk8er_Square]

i can just change any increments, even by 1 so that means its unlocked right? the problem is i thought the vcore for a 2600 was 1.65 not 1.5...but i havent been having problems..so i guess i will just try that