• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Overclocking suggestions

H

HatefluX

n00b
Joined
May 24, 2005
Messages
63
First I've looked through the guide and understand most, but not alll of it.
I want to attempt a mild overclock on my Venice A64 3200.
My mobo:
Bgf nf4 ulta, can't find or don't know what the memory divider looks like.
HT multipliers are 5 to 1x
cpu defaults @ 200=2.0ghz
Ive tried stepping up the cpu and stepping down the memory from 200 to 166.
I've played around with the HT multipliers, stepping down, auto etc.
Problem is I dont know what i'm doing.
Can any one suggest setting to achieve 2.2ghz.
I'm postive its my memory settings that are crashing the system.
Cooling is a cooper heatsink with a 5000rpm fan, should be good enough.
Thanx
 
HatefluX said:
Ive tried stepping up the cpu and stepping down the memory from 200 to 166.
Click to expand...
thats the memory divider
it should be a setting to run memory at 166mhz, 150mhz etc... just choose the one below 200mhz

raise fsb to 220, maybe a slight increase in vcore, just test it and see. thats probably all you will need to do for a 200mhz oc. put ht multiplier maybe to 4x. it may still work on 5x, but youll be safe with 4x
 
I agree, kick down the HTT multiplier. The bus cannot be saturated with current technology so even if it is under 1000 or 2000 mhz, it wont matter anything to performance.
 
You must log in or register to reply here.
Back
Top