Overclocking on OLD KT600-A

[jcovarrubiasu]

Hi.
I need some help overclocking and old board with and old cpu "sempron 2800" I knwo this is an unusual request.

This is what I have done

via Jumper configuration you have 2 settings.
FSB to 100, 133,166 and 200 MHZ

If I set the Jumpers to 166, on the BIOS FSB frequency tunner, I can play between 166 and 199.

If I set the value to 166, I get the normal speed from the CPU 2.0 GHZ.. (I belive this is the standard speed)

The highest I have been able to set this value is 180, witch sets the CPU to 2.16 GHZ. (Nice, but not what I expected)

If I set this arround 185, the CPU starts reloading every 3 secs ... however the cpu temp never goes above 45-46 C....

Witch I guess I need to tune the CPU voltage, however I can not find on the bios how to modify the CPU voltage.

Currently is on 1.5v

any help is apprisiated.

Thanks.