• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

overclocking corsair pc4000

M

mpegripper

[H]ard|Gawd
Joined
Oct 8, 2001
Messages
1,212
hey guys,

i have the setup below and i can get my cpu to 2.5GHz, but i can't seem to get my ram to 250MHz x2=500, which is what the ram is rated at!!!!!!

i've loosend the timings a bit and brought the voltage from stock(2.75) to 2.9 without success. i seem to top out around 230x2=460.

I am testing with prime95 and when i run the memory intensive test i get errors at about 1 minute.

Any ideas?

TIA

mpegripper
 
Drop your multiplier on the cpu, then max out your memory with a clock speed you know your cpu can handle....also use the bios default memory timings to see if it hits 250mhz
 
You must log in or register to reply here.
Back
Top