• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

overclocking a coppermine cpu

D

desrin

[H]ard|Gawd
Joined
Apr 19, 2002
Messages
1,599
I have a 866 coppermine cpu with a plain coolermaster fan and one exhaust fan in the case, how much can i overclock this sucker?
 
What board, Your not going to go too far since this is a 133fsb cpu and a lot multi. even if you can get it to 160fsb, that's only 1040mhz 6.5 multi.

Last P3 coppermine i had was a 750 100fsb, it would do 155 with an alpha slot 1 Heatsink. 1162mhz

That's a hard cpu to clock that your using.
 
its pretty hard to gat coppermines over 1000 anyways.
 
I have 2 coppermine CPUs - one 500Mhz that's capable of running at 750-775. The other one is 600MHz and runs at 800-840... But those are 100 MHz FSB cpus and those are much better overclockers than the 133 FSB models...
 
I had 2 coppermines... (both slot1 - 100FSB cpus)

a 600e that would do 900Mhz
and one 700e that would do 1050Mhz

Both were limited by the mobo at 150FSB (or maybe ram)

But the limit on most coppermines is around 1000-1100Mhz
 
You must log in or register to reply here.
Back
Top