• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Ordered PSU Sleeving Kit(Need Tips)

T

TheMagicalJew

Limp Gawd
Joined
Nov 9, 2003
Messages
457
Hey Guys I was wondering if you guys could give me some tips on Sleeving my antec 420W. I want it to turn out the best so i ordered 20 feet of cable :)


Thanks for all of your time


Julian
 
Hi,

Sorry if you already know these.
I found that braiding the cables first makes sleeving easier and neater. Another thing I found is that it's even cleaner (in my opinion) to hide some of your cabling (like the ones to power your hard drives) under the motherboard and it's easier to do so without the sleeving the cables.
Good luck.
 
One tip I've got is to wrap the pins in tape before trying to slip the sleeving over them, otherwise you risk catching the metal on the sleeving and messing it up. Also, mark or have some sort of reference for the pins to see that it all gets back together correctly.
 
The 2 black wires are ground right? If so, does it matter if they are crossed or not? I just got my sleeving kit and I stare at it wondering these things.
 
You must log in or register to reply here.
Back
Top