Opty 144 - Sweet Jesus!

E

Elipsn

Limp Gawd
Joined
Jul 28, 2005
Messages
472
Got the 144 I ordered from monarch a few days ago -

CACJE 0603GPBW

I'm at 1.45V on the cpu, 9x310 = 2.8Ghz Windows bootable, not sure if stable, haven't benchmarked...

I'm gonna see how high I can take her up to around 1.5v, then I am gonna see how high I can go while stable, I'll update as I find out.

None the less, seems there are still some good cores floating around, sweeeet!
 
Now at 9x330 at 1.525V. Not going any higher than 1.5v, Hope I can break 3.0ghz.
 
Keep in mind I'm just talking windows bootable at this point, in the early stages of things ;)
 
Oh well I can get mine up to 2.9 with windows. Anything above that and i cant boot. 2.9 isnt stable though. 2.75GHz is prime/OCCT stable. So you need to make sure its stable before venturing on but I see what your doing. Trying to find the max bootable OC first, then lowering it down one by one to find stable.
 
Well, I just did a 32m Super Pi at 330x9, 1.6v, now to try occt with memory at 1:1 with htt......

Man, I may have just lucked out, it looks like this is one hell of a stepping - sweet! Hmm...I wonder if I can push any further if I up the voltage........I'm scared to go past 1.6v - full load I'm currently at 38c, which, if you factor in I'm on a DFI Expert and it reports cpu temp about 10c too low, thats more like 48c at full load.

anyone dare me to see if I can get 340x9 at 1.65? Heheheh

Yay Ninja HSF.

I'm gonna do the 24hr super pi and stuff overnight tonight, wish me luck!
 
Nice chip you've got there...some of the more recent Opty's have been doing very well...this is proof of that.

Keep pushin' 'er...I'll watch this to see how you're doing, and to lend a hand if needed.
 
You must log in or register to reply here.
Back
Top