Only 1 core in core temp

[Badr]

Hi
I just installed Athlon X2 7750 Black Edition in GA-MA770-DS3P Gigabyte mobo ,when i looked at core temp, i only see cpu#0 21C.
what could be the problem?

Any help appreciated
Thank you

 

[DedEmbryonicCe11]

The obvious: Have you checked if your BIOS is updated for Kuma yet?

After that you may want to try another program and see what it reports. 21°C is suspiciously low for air cooling unless you keep your house frigid. Your Kuma is based on the Agena Phenom core which only has one temperature sensor per chip (not one for each core). I don't know if this is the case because I don't have one to test but Core Temp may be smart enough to not duplicate the reading. Some programs will report multiple sensors with identical temperatures.

 

[Badr]

Hi
The 21 degree C is at idle ,I installed Everest Ultimate Edition in sensor it shows both core temp but same number for both,even in core temp there is freq.#0 and freq.#1 when its idle both 0% when i used Orthos both 100% load.
My Gigabyte mobo its AM2+ and AM3 ready i am using F2 bios in Gigabyte website there is a new bios F3 in description it says "Update CPU ID (AGESA3.3.2.0) "
i dont know if this is the problem with core temp.

Any help is appreciated

Thank you

 

[DedEmbryonicCe11]

Try HWMonitor http://www.cpuid.com/hwmonitor.php

If that also says 21°C at idle I would email tech support and verify temperature reporting is working with Kuma chips on your motherboard.

 

[Badr]

Thank you for ur help.
i installed that CPUID software it shows core #0 and core#1 now 24C bc i close the case ,i am using a cooler master hyper tx 2 air cooling with ocz freeze thermal compound maybe its the compound is so good,i read god about it.

Thank you again