one last question

P

PC N3WB

Limp Gawd
Joined
Feb 20, 2008
Messages
196
Because i ordered the OS as one of the first components (XP Home edition) i was wondering woul i have to edit the install disk with an nlite tool and add all the drivers for the comonents i want to get. Has anyone had any experience using this tool??
 
What components are you talking about. If your talking about raid drivers you can use nlite or use a floppy
 
Odds are you will be just fine using the disk as is. If you are using a RAID controller then you might have issues, but I would be that XP will pick up most of your hardware just fine.
 
Intel core 2 duo E8400 OC to 3.5Ghz target
Gigabyte GA P35C-DSR iP35
Corsair HX 620W PSU
Tunia tower 120 LED CPU cooler
Corsair 2GB 2x1GB XMS2 PC2 6400 CAS4 timings
Seagate barracuda 320GB 16mb cache
BFG geforce 512MB 8800GT (PCI-E 2.0)
 
Well if u only have one hard drive you dont need to worry about raide. Besides that everything is fine. Doesnt seem like u need to add any components into the xp cd
 
You should be fine with all of that.

Like was said above, if you don't have two or more hard drives, then you don't need to worry about raid.
 
You must log in or register to reply here.
Back
Top