One last check and decision before purchase

Scherdy

n00b
Joined
Dec 29, 2004
Messages
13
So here's what I have so far. The vid. card and evga mobo were a combo deal which as since expired so now I'm wondering which of the mobo's to get. I admittedly don't know enough about to computers to be adjusting and tweaking very much so anything solid that will last while minimizing me messing with important things is a huge plus.

Re: the power supply, is this the NeoPower a good choice? I was reading an article on it and it was recommended. Would love to hear your thoughts.

My Wish List

The last couple things I'm looking to add are a mouse and keyboard that won't break the budget but are relatively nice. I can always just run to the nearest major comp. store too later though...

Any other suggestions would be welcome too. I'm looking stay around $1400. Thanks up front everyone for your help on here.
 
Thanks for the mouse/keyboard info. I'll go check at the local store and try to get the rebate.

On the mobo's, is the DFI one that is <$100 what you would do, or will I be happier down the road spending the extra 35-50 on either of the other choices?

Much appreciated.
 
for a few more dollars, the asus premium has a heatpipe instead of the chipset fan(which often goes bad). $176 for the premium.
 
Another consideration is if I keep the 2 gb of crucial and go from the 7800GT to the 6800GT to save $120. That would leave a little more cash for the extras like mouse, keyboard, speakers, games etc...I dunno, all these last minute things I thought I had decided on start popping back into my head! :D
 
stick with the 7800 series. And get 2x1GB of Crucial Value.

good choice on the mobo (DFI nf4-DAGF), I bought one of those. Great OCing.

O god! NO SAN DIEGO!!!!!!!!!!! The extra cache is NOT worth the money.

Get a 3500+ Venice for $135 from www.ewiz.com . Will save you a LOT of money and you'll get the same performance.

Upgrade to a GTX with that money. I recommend eVGA. Lifetime warranty, step up program, and they OC well.

Everything else is GREAT.
 
Thanks for the advice. I looked on ewiz.com and the 3500+ was like 225 instead of 135. Am I searching for the wrong product or maybe they had a special that just ended. Anyhow, I've got two different opinions now. Is the 1gb cache on the processor going to be noticed by me if I'm using the comp. for gaming and just basic photo storage and very minor editing?

Where would I see the performance difference by going with a processor like the San Diego with the 1 gb cache vs the Venice with half that?

I know nothing about OC-ing and doubt I trust myself anytime soon to be doing that so taking that into consideration....would your advice change at all?

Mucho Gusto!
 
I would step up to the DFI Ultra-Infinity myself. Just make sure you get a SATA II / 3.0gb/s hard drive to match. (I personally am not the biggest maxtor fan anyway). Why not OCZ or Corsair or Mushkin RAM instead? I like crucial but there are cheaper options that are just as good.

there are also other PSU options as well that I would consider, including the Enermax Whisper II, Antec Truepower II, and the Fortron AX (not axe) series.
 
nah, Crucial value is very good for the money. Most people get over 240mhz w/ 3-3-3 timings.

Well sure thing on the ultra infinity. I didn't know that one existed. It looks like a good performer.

But DON'T get SATAII. IMHO It's a waste of money. The Maxtor will be faster than a normal 8mb cache sata2 drive. The 16mb really helps. There is nothing wrong with them, lot's of people get them.

There are certainly better options than the neo2 for a PSU, but I think that the neo is sufficient.

And about the 3200+, you have to look for the e6 rev (newer): http://www.hardforum.com/showthread.php?t=949887
Still $134 and some change.
 
I don't mean the Neopower is bad, just more expensive than others that would likely do the job just as well (and with more wattage to boot). The Infinity has a SATA II raid, and WD makes a 250 gig SATA II with 16 MB cache that costs about 10 bux more than the one hes got. Its on newegg
 
Just checking RAM found OCZ that was 23 bucks cheaper...I don't know if I'd notice the difference. It's been about 8 years since I last upgraded or bought a new computer.... :eek:

I'll look at the SATA II HD's with that Infinity. The HD I have, in the features says SATA II. Is that what I should be looking for? Can you link me one that is what I SHOULD be looking for if I go with the Ultra Infinity?

Also, being my first build...the Venice is OEM right? So I have to just buy a heatsink with it since it's not retail? This does make me a bit more nervous rather than just taking it out of the box and plugging it in but again, maybe you can soothe my fears here again. :)

For PSU's, as long as it's what...450-500W it should be ok? SmartPower or TruePower from Antec? I'll browse those to save a little more if those will do. Just don't want to skimp too much on something like this component according to you guys.
 
Scherdy said:
Just checking RAM found OCZ that was 23 bucks cheaper...I don't know if I'd notice the difference. It's been about 8 years since I last upgraded or bought a new computer.... :eek:

I'll look at the SATA II HD's with that Infinity. The HD I have, in the features says SATA II. Is that what I should be looking for? Can you link me one that is what I SHOULD be looking for if I go with the Ultra Infinity?

Also, being my first build...the Venice is OEM right? So I have to just buy a heatsink with it since it's not retail? This does make me a bit more nervous rather than just taking it out of the box and plugging it in but again, maybe you can soothe my fears here again. :)

For PSU's, as long as it's what...450-500W it should be ok? SmartPower or TruePower from Antec? I'll browse those to save a little more if those will do. Just don't want to skimp too much on something like this component according to you guys.

You still have to put the heatsink on a retail proc. They come separated. Go to www.svc.com and get a cheap thermalright one (I did) for ~$8 shipped. It comes with a thermal paste pad already applied, so besides getting it from two different places, it's the same as retail.
 
Russ said:
You still have to put the heatsink on a retail proc. They come separated. Go to www.svc.com and get a cheap thermalright one (I did) for ~$8 shipped. It comes with a thermal paste pad already applied, so besides getting it from two different places, it's the same as retail.

Wow, thanks. Sorry for all the annoying questions.

Back to the power supply. Would a 430W Antec TruePowerII be sufficient? Would I need a 480 of the same flavor instead possibly?

Again, just to clarify on all this. Not planning on overclocking at the moment.
 
hmmm, yea with a GTX you would defiinitely want 480w. That'll be enough though.

O and I forgot to say, I can't think of ANY situation where the extra cache will help you greatly. Certainly not yours.
 
OEM is great if ur savin' money (except u don't get a pretty sticker :p ) The Retail sinks aren't great, and there pretty loud, so getting a better HSF is actually reccommended I like Arctic Cooling, Zalman, and Thermalright, which might be a little out of your price point (60+ bux) But Cooler master, Thermaltake, and a few others make some pretty decent coolers as well. Don't worry, heatsinks aren't too hard to install...In fact zalman has flash videos that show you how to install them and have a complete list of compatible motherboards so u know they will fit correctly

As for your HD, it is an SATA 150 hard drive, but the mention is under features, which I found rather ambiguous: it either means A) this hard drive has similar features to Maxtor's SATA II line of drives and has NCQ or B) Maxtor SATA II drives have NCQ. regardless, the one you chose is an SATA 150. I dunno how big a deal it is, though.

Yeah, if u have a 7800, get at least a 450W PSU (but I believe they reccommend at least a 480) and it would be nice if the PSU had a 24 pin connector. No not Smartpower, Truepower. Smartpower is not as good.
 
Scherdy said:
Wow, thanks. Sorry for all the annoying questions.

Back to the power supply. Would a 430W Antec TruePowerII be sufficient? Would I need a 480 of the same flavor instead possibly?

Again, just to clarify on all this. Not planning on overclocking at the moment.

I believe you could sneak by with a 430watt Truepower, they stated 335watt PSU recommended for the 7800GTX which actually uses less power than the 6800 Ultra.. But a beefer power supply always leaves more headroom, but you really do not have too much right now to really push the limit IMO.

Also SmartPower and TruePower are totally different, I would stay clear of the Smartpowers.

For a side note: 480watt PSU was recommended for a 6800 Ultra, but everyone knows that was bloated as many people got by with a standard setup and a quality 350watt PSU. They really makes those recommendations for people that look at wattage rather than AMPs and quality of PSU they buy. IE a Deer Park 8 Billion watt PSU is probablly a lot worse than a 350watt Seasonic or Zippy
 
Yeah Seasonic, Enermax, Fortron, Antec...those are my pers. favs. even Zalman makes a quiet 400W PSU I've heard really good things about
 
_dd0g_ said:
OEM is great if ur savin' money (except u don't get a pretty sticker :p ) The Retail sinks aren't great, and there pretty loud, so getting a better HSF is actually reccommended I like Arctic Cooling, Zalman, and Thermalright, which might be a little out of your price point (60+ bux) .

Wow, can't thank you all enough. Withe the HSF's if I got the OEM Venice, it would be either the Artic Cooling HSF OR the Zalman right? Or is it both?? Same if I went the route Russ recommended with the thermalright at svc.com? That would be all I needed to go with the CPU to install?

I'm going with the TruePowerII 480W blue (I think it's just a light that's on it) which was about 15-20 cheaper than the NeoPower.

We're newly married so thanks for the extra $$'s you've helped knock off this and still keep what we wanted. ;)
 
UltimaParadox said:
I believe you could sneak by with a 430watt Truepower, they stated 335watt PSU recommended for the 7800GTX which actually uses less power than the 6800 Ultra.. But a beefer power supply always leaves more headroom, but you really do not have too much right now to really push the limit IMO.

Also SmartPower and TruePower are totally different, I would stay clear of the Smartpowers.

For a side note: 480watt PSU was recommended for a 6800 Ultra, but everyone knows that was bloated as many people got by with a standard setup and a quality 350watt PSU. They really makes those recommendations for people that look at wattage rather than AMPs and quality of PSU they buy. IE a Deer Park 8 Billion watt PSU is probablly a lot worse than a 350watt Seasonic or Zippy
i think my 430 true power is a exhalent PSU.. i have ran 6 HDDs ( got 4 now) at a time and a 6800GT and all my other stuff.. and i havnt seen a hinch of power loss or anything the rails stay at about 11.8v and thats fine to me.. better to be under voltage then to be over voltage... i believe i could have gottem anouther 6hdds on this PSU... i really recomend it.. and ANtec has a great warrenty.. seeing how the 6800gt takes about the same wattage as a 7800gtx... i think youll be perfect...
 
Scherdy said:
Wow, can't thank you all enough. Withe the HSF's if I got the OEM Venice, it would be either the Artic Cooling HSF OR the Zalman right? Or is it both?? Same if I went the route Russ recommended with the thermalright at svc.com? That would be all I needed to go with the CPU to install?

I'm going with the TruePowerII 480W blue (I think it's just a light that's on it) which was about 15-20 cheaper than the NeoPower.

We're newly married so thanks for the extra $$'s you've helped knock off this and still keep what we wanted. ;)

Um I didn't see the Cheap Thermalright at svc...at least not 8 bux cheap. I saw this which is VERY reasonably priced for what it is, but if you get that, you have to get a fan for it as well. I think EITHER the Zalman OR the Arctic Cooling one (you just need one :D ) will serve you well. My personal fav is the zalman though...heck its in my rig and I love it. but the AC has the heatpipes which is good too. So yes the retail version of any CPU just includes a heatsink and with OEM thats all you need to add.
 
im actually very pleased with the stock cooler amd supplys... it gives great temperatures and is reasonably quiet... thats really all that matters to me..
 
_dd0g_ said:
Um I didn't see the Cheap Thermalright at svc...at least not 8 bux cheap. I saw this which is VERY reasonably priced for what it is, but if you get that, you have to get a fan for it as well. I think EITHER the Zalman OR the Arctic Cooling one (you just need one :D ) will serve you well. My personal fav is the zalman though...heck its in my rig and I love it. but the AC has the heatpipes which is good too. So yes the retail version of any CPU just includes a heatsink and with OEM thats all you need to add.

Ug, a Thermalright XP-120 is unneccesary imho. Doesn't cool much better than an XP-90, which you can get here at jab-tech for $28:
http://www.jab-tech.com/catalog/Thermalright_XP90__OEM_p_2921.html
(And add a GOOD fan, a panaflo, for $8 more and GOOD thermal compound for $3 more (Arctic Silver Ceramique)). If you get a Thermalright XP series heatsink, you will need to buy a fan separately, but they will cool your CPU very well. I THINK you will also need thermal compound. So anyway, if you want to, you can get a XP-90 w/ everything you'll need for $39 at jab-tech.com, via the link I used above. An XP-90 will cool your CPU very well even under extreme overclocking. So if OCing is in your future, it would be a good investment. (Note that there are also XP-90c and XP-120 heatsinks, but they only cool a few degrees better under load and are almost twice as expensive, yipes!)

So anyway, I made a mistake. It wasn't a thermalright heatsink, it was a Cooler Master heatsink. here it is, for $4.99 + shipping:
http://svc.com/dk8-7152d-01-19.html
I picked the 5-15 business day shipping and it shipped in about a week.
Cooler Master certainly isn't a bad name, they make the "Stacker" case, which is very popular for some people.
 
As much as I read about the DFI NF4 Ultra Infinity, I'm still confused. Is this a mobo for someone who is really good at tinkering with their settings and maximizing their computer's performance or is it just a good, basic mobo that will help me get the most out of my system with minimal (or no) adjusting to try and maximize my computers burnination?

I am not going to be squeezing each component to try to get the last drop of speedy goodness from my computer. I'd rather "set it and forget it" much more often than the alternative.

Thanks AGAIN everyone. :D
 
Back
Top