• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

One Laptop, Two Infocus ProJectors

O

OldGuy

Gawd
Joined
Jun 25, 2000
Messages
762
Is there any way to get two Infocus projectors to project the same picture from one laptop?
 
What sort of output does your laptop have? If you're lucky, it has an rca output and a monitor output. You should be able to hook the RCA output (or it might be svideo) to one projector, and the monitor output to the other. Then just hit the keyboard combos to turn on the correct outputs.

If you don't have an rca/svideo output, then you'll need some sort of vga splitter to split the signal from the monitor output.
http://www.cablesforless.com/browseproducts/VGA-Splitter-Cable.HTML

Might get some signal loss though if you are running high resolutions, but more than likely the 800x600 or 1024x768 you'll be using will look ok. For long cable runs, you'll probably need a powered splitter.
http://www.directron.com/2wayvidsplit.html
 
You must log in or register to reply here.
Back
Top