omg i need a new psu?

thebro

Gawd
Joined
Mar 5, 2004
Messages
645
i have a cheapy allied psu and the voltages are unstable as hell
im thinkin' of getting a thermaltake 480.
comments are welcome.
untitled.JPG


edit/ oh ya when i go on full load my pc just turns off. is this because of the vcore?
 
Your +12v Rail is pushing mighty low under load.. In other words.. yes..dear god yes get a new power supply!. Never take chances with something like that especially when your system is randomly turning off.
 
do it the [H]ard way and volt mod your rails. i've got a cheap psu from qtec with rails that drop quite low, especially the 12v rail and i'm gonna mod it soon to get some more stability
 
Don't trust software based voltage monitoring software. To be sure of what your PSU is actually providing, you need to use a multimeter or voltohmeter. Except the 12v, all the other rails look great.
 
Originally posted by Vertigo Acid
Don't trust software based voltage monitoring software. To be sure of what your PSU is actually providing, you need to use a multimeter or voltohmeter.

forgot to mention that, get a voltmeter on your rails if you can before you splash out on a new psu.

you might wanna try some mosfet heatsinks as well, i've heard some people say these can give as much as .2v increase just due to the lower resistances involved from lower temperatures.
 
Originally posted by ciggy50
all i can say is ...... you b*st*rd !!! :p

lol, cheers mate, i've had it running at 252 x 10.5 (2.64ghz) but it's not stable, need better cooling and better ram

fr33ze-2.64ghzcpuz.JPG
 
I had my psu's fan stop working recently.

When we took it out it had 3 inches of dust in.

So I upgraded to a Tagan 480watt and it runs nice and quiet now.

And it was on sale so only £55 ^^
 
was it the same allied from newegg.com? They have a 500W one that is like 65 bucks that I was thinking about getting. I did some homework and it is on AMD's list of approved power supplies. Maybe you got a bad one?
 
well i tested it out.

took it out and shorted green to ground and checked all the voltages. all low ass hell. and if you plug in a fan it goes nuts.

i got a true power 430 today and it has stable rails but lower voltages too.

i don't have hs on the mofosets. i have a max-3 with otes so i think its fine.

i would get pics up but my computer with that im working on has a prescott in it and well... goes to about 60C so i don't want to runn it much until i get my water on.
 
You must test it with the system attached. ATX PSUs, being switched mode power supply units, require load to maintain regulation. If you unplug it from the load, it will of course be reading bad voltages.
 
Back
Top