Old school: Abit BE6-II

texasbox

n00b
Joined
Feb 23, 2004
Messages
4
I have an Abit BE6-II 1.x ver (not the 2.0 ver) that I've been running an Celeron 366 (OC'ed 550) in for about 4 years now.

I was wanting to upgrade it a little so I can keep from totally replacing it a little while longer.

The last bio upgrade for the mobo says Support Intel PIII / Celeron CPUs up to1.1G(100). (Please mention: This board does not support Tualatin core PIII / Celeron processors.)

I'm guessing this means I have to use Coopermine chips.

Searching pricewatch and newegg I've only been able to find 133FSB 1G P3s. My question is can a 133FSB Coopermine work in this 100FSB Mobo?

Thanks
 
You'll have to clock them down to 100 Mhz fsb. 110 if you push it. I could be wrong, but I think an adapter and a whole lot of modification is necessary to run copper mines on the board, as its a ppga not fcpga socket. Check out Bp6.com for more info.
 
you probaly need a bios upgrad to let it run beacuse if you drop the fbs then you will be loosing the porcesser speed. and that is not what you want mabe you should go to a new mother board
 
I installed a Tuatalin Celeron 1.4GHz - it came with a slot converter and HSF - go here:
http://www.powerleap.com/

My system doesn't show the right speed at boot up - but it runs at 1.4 and has no problems.
 
Back
Top