Oh No!

shivang222

Limp Gawd
Joined
Dec 31, 2006
Messages
302
i was gone and i left my computer on...
i came back and see a blue error screen talking about a physical memory dump....
then... i restart to find an error message saying error loading operating system...
HELP!

will i lose all my data??
 
yes this is my laptop...
if i re install my OS... will i lose all my data that is on the hard drive?

ill answer any questions you have of the problem...
 
Well, I know there are some SATA & IDE - to - USB cables. That will allow you to connect you hard-drive to another pc, maybe a friend of yours, and save all that information in another pc, and later on make backups in DVD's or something. But I'm not sure if this will work for laptop hard-drives since I've never had a laptop.

Another option is: Some brands, like eMachines, give you a recovery disk that will allow you to recover everything to its original state, and at the same time make backups in a partition in your harddrive. But careful, not all Recovery disks do this, and some will just erase everything.

Well, hope that helps in some way.As you see, i'm still a "n00bie". ^^
 
I would start by trying to run a repair on the install.
Failing that, running your hard disk manufacturer's diagnostic utility would be next on my list. If all passes as fine, you'd be clear to reinstall your OS, which, depending on whether you let it reformat your drive, can potentially erase all of your data. Pulling the drive and using a 2.5" to 3.5" IDE adapter or a 2.5" USB external enclosure, and then backing up your data would be preferable
 
im kind of desperate not to lose my data (music files)...
I dont mind if i can never use the computer again as long as the files within the hard drive can be recovered by connecting to another computer or w/e...
is this possible?
 
im kind of desperate not to lose my data (music files)...
I dont mind if i can never use the computer again as long as the files within the hard drive can be recovered by connecting to another computer or w/e...
is this possible?

depends if the hdd is nuked. from the sounds of it, probably isn't.
 
What kinda laptop is this? Alot of times (with Dell's) the IDE cable is lose connecting the HDD.
 
If you can't get the drive to boot, see if you can plug it into another PC that can boot windows, and plug this one in as a slave.

Get all your important stuff off, then resintall windows on the "broken" drive.

or:

You can use the Windows CD to repair your OS if you are using XP.
 
thx...
so i can "probably" get my music outta ther somehow...
is this cable to connect to another computer hard to find?
what is it called?

(its the laptop in my sig)
 
You can also get a 2.5" Hard drive enclosure. This will let you connect your drive to another computer over USB. There are a bunch on Newegg for around 10$.
 
no it shouldnt be hard to find, i just googled it and came up with this

http://www.amazon.com/Laptop-Drive-Adapter-Idc44f-idc40m/dp/B000067RRQ

should work.

if you want more options i just googled laptop harddrive cable converter.

That's a good cheap solution but a USB connection might be easier. You can find this adapter at a lot of web shops but if you live near a MicroCenter they usually have it on the shelf. It supports both 3.5 and 2.5 drives:

Link

As mentioned above, an enclosure would do the trick as well.
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
Don't mean to sound like a douche, but did you learn your lesson about always backing up important data so there will not be worries like this?
 
Don't mean to sound like a douche, but did you learn your lesson about always backing up important data so there will not be worries like this?

+1

when i lost my first 60G of music and another 20 or so of college files, documents, media etc, I got a whole lot better at this. :)

I now have everything backed up twice.
 
To save taking the laptop apart and stuff, can't an external hard drive be purchased, plugged into the laptop and have windows installed on it so the stuff can be pulled off the internal hard drive; or can't an OS be installed on external hard drives?
 
Pop windows CD in, and do a repair install (don't format) before you try anything else. Easiest way to fix things (if, of course, it works).
 
Pop windows CD in, and do a repair install (don't format) before you try anything else. Easiest way to fix things (if, of course, it works).

+1, start here!!!

Should this not work, you're best investment would be to get an external enclosure and try to pull the info off. More than likely you will be able to get the information off because physical memory dump is normally due more to a problem with your RAM or virtual memory. Also, if your system gives you the option to boot into safe mode from the Windows splash screen try that and immediate get the stuff of. Might be a good idea to pull out your RAM and re-seat it.

GL and Godspeed
 
when i try to repair...
it comes to something called the repair console... then its says type exit to quit repair and restart computer... i do it and it dont work...
i guess i should buy the cable...
 
when i try to repair...
it comes to something called the repair console... then its says type exit to quit repair and restart computer... i do it and it dont work...
i guess i should buy the cable...

It sounds like you are hitting F2 when you start the windows setup. An easier method would be to go past this and after you hit F8 to accept the license agreement there "may" be an option to press "R" for repair instead of loading your entire OS (which for the most part it does to some extent)

The recovery console is for people who have good command line knowledge and know exactly what they are doing in there. I don't recommend most people go that route especially if you are in a hurry.
 
A head crash, age, a lot of heat (maybe).

....etc etc etc. A hard drive is a sensitive electro-magnetic instrument. There are dozens of different things that could go wrong.

Anyway, you don't want to choose the Repair Console option. Boot from your disk just like you're going to install the OS. Once you get past the license agreement, there may be a repair option as clayton006 stated. If that doesn't work or it's not an option, reinstall the OS as an upgrade, not as a clean install. Doing that should correct the system files that are giving you problems and leave everything else intact.
 
If all your concerned about is getting your data off the laptop, buy this $10 External Enclosure from Newegg and put the old laptop hard disk in it. Once you have the laptop drive installed in the enclosure, plug it into a working computer via the included USB cable and copy your data off the drive.

As a side note, the hard disk should be fairly easy to remove, just two screws on the bottom or side of the laptop and it will slide right out. Once you have your data saved, you can even reinstall the drive in the laptop and reinstall Windows without fear of losing anything.
 
i start my computer.. and can either go to setup F2 (just system specs) or go to One-time boot F12...
i push F12 and load my cd from the cd drive... then a blue box appears and begins working... finally.. options appear to repair... begin setup... or quit...
i push "r" for repair and it goes to the recovery console... then it tells me to push exit and restart computer... but my comp stil can load OS...

aslo...if my hard drive is dead... then i cannot pull anything off it right?
 
but.. if my hard drive is dead... then i cant pull anything off right?
Yes, that is correct...but let's hope for the best, shall we? :p

You said it was able to blue screen at startup, that means that it's at least reading something from the drive...
 
i push F12 and load my cd from the cd drive... then a blue box appears and begins working... finally.. options appear to repair... begin setup... or quit...
i push "r" for repair and it goes to the recovery console... then it tells me to push exit and restart computer... but my comp stil can load OS...


Well you may still not be going far enough into the setup. You know you've went too far when you are looking at your hard drive volumes and choosing one to start up on. After you press F8 for the EULA, then hit "R" and it should automatically start repairing. It should not go to the Recovery Console.
 
Choose the "Begin setup" option. It won't just start erasing shit and dumping new files onto your disk (or at least it shouldn't). It will look for an existing copy of Windows first. Once it finds it, THEN you should have a repair option. If not, choose "upgrade" install.
 
Perhaps I missed this, but are you using a 'real' Windows CD, or the dell system recovery CD? When I had a dell laptop, all it came with was a recovery CD, and not an original Windows CD. I don't know whether the dell recovery CD will have all the repair options of the real thing.

If you are more concerned with saving your data than having a working computer, I would recommend attaching the laptop hard drive to another computer using one of the enclosures linked in this thread and retrieving your data before messing around with a windows reinstall. I know the repair install should not delete your data, but I have had mixed success with this and I always seem to manage to loose my data. :D

Good luck
 
You don't want recovery console. Keep going as if you were going to install WIndows normally, and let it search for existing installations (just don't format or anything). It should have an option to repair the existing installation.
 
Back
Top