86 5.0L
Supreme [H]ardness
- Joined
- Nov 13, 2006
- Messages
- 7,085
EDIT: SOLVED! Molex ground pin had wiggled out of the connector
First off, heres my pump setup
http://img34.imageshack.us/img34/1961/img1238ay.jpg
http://img10.imageshack.us/img10/4673/img1239ed.jpg
as you can see the pump isnt straight and would hit the side panel, but I figured the vibrations wouldnt be too bad at 20%. As I was closing up the case, I glanced at my temps and they were pegged at 100*C(again lol) I quicky remove the side panel thinking I pulled off a power cable. Nope, then the pump quickly came back to life. puzzled I touched the pump to the side panel and it shorted out! temps climbed to 100*C once again, removing the panel my pump came to life again :S.
Is there a short in my case? is that normal?
First off, heres my pump setup
http://img34.imageshack.us/img34/1961/img1238ay.jpg
http://img10.imageshack.us/img10/4673/img1239ed.jpg
as you can see the pump isnt straight and would hit the side panel, but I figured the vibrations wouldnt be too bad at 20%. As I was closing up the case, I glanced at my temps and they were pegged at 100*C(again lol) I quicky remove the side panel thinking I pulled off a power cable. Nope, then the pump quickly came back to life. puzzled I touched the pump to the side panel and it shorted out! temps climbed to 100*C once again, removing the panel my pump came to life again :S.
Is there a short in my case? is that normal?
Last edited: