OCZ 1150 2X1GB Reaper Memtest fails @stock

[elec999]

My OCZ reaper 1150 @2.1 volts says on the box. Fails Memtest on Asus P5B pro everything stock.
Thanks

 

[jimbo6846]

Are you testing 1 stick at a time in Memtest? If not, take out 1 stick and test 1 at a time. You likely have a bad stick there.

EDIT: Did you manually change the DRAM Voltage to 2.1? Or did you leave it at Auto? If it's still on Auto, it's being undervolted.

 

[elec999]

Are you testing 1 stick at a time in Memtest? If not, take out 1 stick and test 1 at a time. You likely have a bad stick there.

EDIT: Did you manually change the DRAM Voltage to 2.1? Or did you leave it at Auto? If it's still on Auto, it's being undervolted.

I did test it with 2.1v.
Thanks

 

[demonx]

Go to the OCZ forums and post a thread about it then. They will send you RMA instructions if one or both of the sticks are actually bad.

 

[jimbo6846]

Yeah, sounds like you have a bad stick then. You might want to leave out any info about you overclocking them, if you did.

 

[andyOCZ]

We don't care about overclocking like some companies do. We honor our warranties no matter what.

I would test each stick alone first. I they both have errors you have another problem; probably settings. A trip to our forums is a great idea. We can help troubleshoot and set you up with an RMA if needed.

http://www.ocztechnologyforum.com/forum/forumdisplay.php?f=46

 

[jimbo6846]

We don't care about overclocking like some companies do. We honor our warranties no matter what.

I would test each stick alone first. I they both have errors you have another problem; probably settings. A trip to our forums is a great idea. We can help troubleshoot and set you up with an RMA if needed.

http://www.ocztechnologyforum.com/forum/forumdisplay.php?f=46

Good to hear, I like my OCZ memory