OCed 3.0c temps

[sc121]

I am running my 3.0c@3.7 on an Abit IC7-G and the temps fromt he abit eq are saying at idle 47c and at full load 56c are these temps a bit high considering it is around 25c in my room. I have a sp-94 witha panflo fan on it. if these temps are high any suggestion for lowering them. I also have tried with the side of my case on and off only a few degrees difference either way.

 

[StrongBadia]

Thats high. I get thos temps lower than that when it's 30c in my case.

 

[Shieze]

It depends what voltage you are running, and remember Abit readings are a bit high. Aslong as it is stable I wouldn't worry about it to much, aslong as it doesn't jump much higher then that.

 

[MontyAC]

Feel the side of the Thermalright and see if it's cool to the touch at idle. If it is, you're totally fine. Abit does report higher than normal temp readings.

 

[jaffy]

I'm getting the same temps with my 3.0ghz @ 3.45 @ 1.57V. I'm using a Swiftech MCX4000 with a 92mm 58cfm Panaflo. I can raise my voltage to 1.6 @ 3.6ghz but the thermal throttling kicks in during benchmarking. I have tried reseating the hsf with no effect.