Obsession with having the IO plate

I just like having everything there. Heck I still have all the boxes for my parts.

One thing I find really annoying are the I/O plates that came with the case. I mean, what's the point? There's probably a 99% chance that the ports don't align with the cutouts. Also, aren't they shooting themselves in the foot by increasing shipping weight?
 
I like what Asus does with the plate. They call it Q-shield or something to that effect and basically you place the IO plate over the ports first then place the motherboard in after and it fits like a glove everytime!
 
I don't think those plates included on a case would even make a difference on a shipping scale. Then again , I guess it depends on the sensitivity of the scale. But even if it does, I don't think it would drive the cost of shipping up.
 
While the I/O shield isn't something typically seen due to it's location it is quite simply an incorrect installation of the product. It is meant to be there. It is included with the Motherboard. To me it looks like a hack job if it isn't put in place.

I am with this. It looks completely butchered and unfinished to build a PC without using the IO shield.

Might as well leave out some screws from the motherboard mounts as well, you don't really need all of them. Plus those screws are heavy and probably increase shipping cost.
 
Might as well leave out some screws from the motherboard mounts as well, you don't really need all of them. Plus those screws are heavy and probably increase shipping cost.

That's why I ask specifically for 3 screws.
 
I don't think those plates included on a case would even make a difference on a shipping scale. Then again , I guess it depends on the sensitivity of the scale. But even if it does, I don't think it would drive the cost of shipping up.

I meant that the companies would have to pay more to ship from the manufacturers. A thousand or so cases in a shipping container could make a difference.

Why include it if no one will use it because their motherboards come with an I/O plate that actually fits.
 
I would love to see a test that proves this. I think it's complete bs. Airflow doesn't work in this nice idea of a wind tunnel like so many seem to think, especially with a computer that has a cpu and video card heatsink.

As far as dust bunnies go, air should be exiting from there anyways the only issue I have with that is always where a fan's intake is.

"air should be exiting from there"? thats funny that you tell me that air doesnt move exactly like a wind tunnel and then attempt to cite something that would require the air to move exactly like a wind tunnel. if theres a hole, air is going to seep in or out.


also, it would be incredibly simple to set up a test to prove my earlier statement. temp probes all over, colored smoke, fans, boom...theres your proof...you'll see how it effects temps AND you'll see exactly where the air goes :rolleyes:
 
In general: if it's supposed to be there, I'd rather have it there and not necessarily need it than not have it and need it.
 
I hate using I/O on my own machines. Not having it in I can feel the heat from the mosfets existing out the rear and when you are overclocking any relief of heat is a great thing. For the PCs I build for others they will usually have the I/O shield. I have no issue buying open box for myself without it though since I never use it.
 
"air should be exiting from there"? thats funny that you tell me that air doesnt move exactly like a wind tunnel and then attempt to cite something that would require the air to move exactly like a wind tunnel. if theres a hole, air is going to seep in or out.


also, it would be incredibly simple to set up a test to prove my earlier statement. temp probes all over, colored smoke, fans, boom...theres your proof...you'll see how it effects temps AND you'll see exactly where the air goes :rolleyes:

If you have multiple fans inside your pc you're telling me air won't be exiting from there? Yes it obviously matters where the fans are and what direction they're blowing, but if you have a closed setup and are using multiple it's an obvious exhaust.

Also I'm sure your test would prove I am correct.
 
I don't buy that at all, any setup I can think of it's allowing more heat to escape

I can understand your opinions on wanting it, but seriously you would not buy a motherboard for not having it you were considering?

I wouldn't buy a motherboard if it didn't have the plate. And the guy you replied to is correct. If your cooling is properly setup, the IO plate does not block airflow. In my years of PC building, i've yet to come across a computer case that did not have a spot for an exhaust fan right above the IO shield. Why would you need air flow over your USB ports anyway?

The majority properly configured cases are designeed for negative pressure (more exhaust then intake) and by exhaust I mean active exhasut (fan's) so by keeping the shield off, it's not an exahsut at all, but an intake and air flow will follow the path of least resistance. Since most cases have a filter or mesh in the front, that may now have more resistance than the open IO panel, so air ends up being sucked in from there and exhausted straight out by the fan right next to it without having the chacne to flow through the components and cool them. Mainly the drives that are sittign in front of the case which would now have close to zero air flow. Sure, some componens right next to the shield might get a bit cooler, but at what cost? Those components get enoufh cooling from the air coming off the HSF that is then sucked out by the exhaust fan.

The IO sheild has it's purpose, no matter how hard you try to convince yourself otherwise.
 
Last edited:
If you have multiple fans inside your pc you're telling me air won't be exiting from there? Yes it obviously matters where the fans are and what direction they're blowing, but if you have a closed setup and are using multiple it's an obvious exhaust.

Also I'm sure your test would prove I am correct.

Myself and a lot of people are running more exhaust fans than intake fans. If I had a giant hole in the back of my case, air would be entering from there.
 
I've built one system with an open box board over the past few years that didn't have one. For some reason I hated seeing it missing everytime I looked at the back of the case. If I hadn't sold it to a family member, I would have had a hard time unloading it because it just looked incomplete.

It also keeps kid and cat paws out of the case and that is a good thing.
 
Myself and a lot of people are running more exhaust fans than intake fans. If I had a giant hole in the back of my case, air would be entering from there.

I think it's obvious that he simply has an opinion that he thought most people would agree with when creating this thread. I think it's also obvious that he has not done any testing despite asking people who don't agree with him to run tests to "prove him right" becuase if he actually had run any tests, he'd know better and this debate would not exist.
 
Back
Top