NVIDIA Refresh Rate Fix???

[deadman_uk]

I had a geForce 4 ti4200 many years ago and was annoyed by the refresh rate. Games would always run at 60hz no matter I did. I found a program that fixed this but I quickly moved on to a 9800pro.

Now my 9800pro is gone and I have a 7900GT CO, what do I find? The problem is not fixed!!! How do I fix this annoying problem? I have the latest forceware drivers but there is no override function.

I did a google search and found a program called nVidia Refresh Rate Fix MKII v2.21f E but this doesnt work. I also found a registry key to enter and that also doesnt work.

Any advice is welcome

 

[Retsam]

The best one ive found so far is nvidias own forceware drivers. There is an override, you obviously didnt do much looking around. You just need to install coolbits, or the reg key to activiate it.

Heres the single reg key. Or just install coolbits which activates many.




Refresh Rate Fix

Windows XP and Windows 2000 have an issue in which the screen refresh rate – the number of times per second your monitor redraws the image on the screen - resets to 60Hz (60 times per second) for every resolution by default whenever you install a new graphics driver. This is far too low for CRT monitors (but not a problem for LCD monitors). Most CRT monitors can easily exceed this refresh rate, especially at lower resolutions. Most people notice a flickering effect with a 60Hz refresh rate on CRT monitors, and it is indeed very unhealthy for your eyes (which can detect differences up to 200Hz or more) to view for long periods.

Each time you install a new graphics driver you will have to override this tendency for Windows to default to 60Hz. There are three main ways you can do this, and the choice is up to you as to which you use:

1. In the Forceware Control Panel (See Forceware Control Panel section below), go to the 'Refresh Rate Overrides' section. Note that to enable the Refresh Rate Overrides section in the latest Forceware drivers you will need to use a utility like NVTweak or Coolbits 2 (See the Advanced Tweaking section), or simply open the Windows Registry Editor and under the [HKEY_LOCAL_MACHINE\SOFTWARE\NVIDIA Corporation\Global\NVTweak] key create a new DWORD called NvCplDisableRefreshRatePage and assign it a value of 0. Otherwise this section does not appear in the standard Forceware Control Panel. Once in the Refresh Rate Overrides section select 'Override refresh rates'. In the box below (which now becomes ungreyed) you can allow it to use the Default refresh rate for a particular resolution, or you can manually edit refresh rates for particular resolutions by click on the word 'Default' in the 'Refresh Rate' column next to the resolution you wish to change. Make sure you don't select a refresh rate beyond your monitor's capabilities as this will result in an 'out of frequency' error and can damage your monitor.

2. Alternatively (and this is the method I use) you can use a Refresh Rate fix, such as Refresh Force. Download this small utility and run it (launch ReForce.exe). This is the foolproof method. Just click the 'Auto Populate' button and it will detect the correct maximum possible refresh rates for each supported resolution on your monitor. You can also view and manually change the refresh rate for any resolution (be careful to make sure your monitor supports the new refresh rate entered though), and even specify additional display resolutions. Click the Apply button and the fix is done. It won't run again at startup, or sit in the background, it just changes some registry settings. You will need to use this utility again every time you install a new driver, so keep it handy.

3. Use RivaTuner to alter your refresh rates and/or add, edit or remove particular resolutions and their associated refresh rates. Details are in the RivaTuner area of the Advanced Tweaking section. To be honest, this is my least preferred method due to the risk of causing damage to your monitor.

If you have doubts about using method 1 above, or can't seem to make it work, then I strongly suggest using method 2 as it is simple, safe and foolproof. If you want to know more about altering resolutions and refresh rates, see the Forceware Control Panel section.

Defragment

 

[deadman_uk]

Thanks alot, coolbits 2.0 did the job