Nvidia control panel error/no display

dooshbag

n00b
Joined
Dec 10, 2006
Messages
24
I turned off my monitor today with a movie playing and when I turned the monitor back on it said I had a Nvidia control panel error and the resolution had gone from 1024X768 to 640X480. I think it hinted at restarting my computer (don't exactly remember)so I did and when it restarted all I got was the POST screen and the windows load up logo and then a black screen. The only thing I can access now is the BIOS, tried F8 to get into safe mode but it doesn't work(tried default settings in BIOS as well as OPTIMIZED settings). Could it be that my drivers were corrupted by a virus and that is why there is no display or does the problem lie in my HDD? Is there any other way to fix this besides taking out my hard drive and installing and scanning it for viruses on another computer? Any other options in BIOS that will work? Is this a problem with my 7950GX2 drivers or my HDD?
 
dooshbag said:
I turned off my monitor today with a movie playing and when I turned the monitor back on it said I had a Nvidia control panel error and the resolution had gone from 1024X768 to 640X480. I think it hinted at restarting my computer (don't exactly remember)so I did and when it restarted all I got was the POST screen and the windows load up logo and then a black screen. The only thing I can access now is the BIOS, tried F8 to get into safe mode but it doesn't work(tried default settings in BIOS as well as OPTIMIZED settings). Could it be that my drivers were corrupted by a virus and that is why there is no display or does the problem lie in my HDD? Is there any other way to fix this besides taking out my hard drive and installing and scanning it for viruses on another computer? Any other options in BIOS that will work? Is this a problem with my 7950GX2 drivers or my HDD?

When you hit F8 you got the Safe Mode boot menu and then it booted to a black screen? Or you didn't get any boot menu at all?

Sounds to me like your desktop resolution and/or refresh rate somehow got set to one that your monitor doesn't support.
 
dooshbag said:
I couldn't get into the safe mode selection menu at all.

If you were holding down the F8 key, try rapidly tapping it instead (or vice versa).

If you get an OS selection screen that shows a single instance of Windows XP, press enter and then immediately tap F8.

Once you finally get to the boot menu choose 'Boot in VGA mode' instead of 'Safe Mode', that way you'll boot normally but in VGA mode. Then you can just go into display properties and change to your normal resolution and bit depth.
 
I've tried tapping F8 and that didn't work, what do you mean by "If you get an OS selection screen that shows a single instance of Windows XP"? Is this a different way to access the safe mode menu screen? Are you talking about the next screen image that pops up(the windows logo with a load bar at the bottom) after the "POST" (displays your cpu specs) screen?
 
dooshbag said:
I've tried tapping F8 and that didn't work, what do you mean by "If you get an OS selection screen that shows a single instance of Windows XP"? Is this a different way to access the safe mode menu screen? Are you talking about the next screen image that pops up(the windows logo with a load bar at the bottom) after the "POST" (displays your cpu specs) screen?


No, sometimes if you hit F8 too early you'll get a text based boot menu similar to the Safe mode menu, but it's the multi-boot OS select menu instead. Happens to me all the time but your mileage may vary.


Hmmm...

Are you using a USB keyboard by any chance? Try connecting a normal PS/2 style keyboard?

I'm grasping at straws really... you should eventually be able to get to the safe mode boot menu.


Hmm... here you go. Heres another sure fire way to get the safe mode boot menu:

Turn on your machine and wait for the Windows XP loading screen (the screen with the logo and blue loading bar). Once this is on the screen either hit the reset button on your case, flip the power switch on the rear of the PSU, or unplug the power cord from the back of the machine. Now plug it back in and power it on, you should get the safe mode boot menu now with a message saying something like "Windows didn't finish loading on it's last attempt, you may need to boot into safe mode" yadda yadda.
 
Back
Top