nVidia 6600 GT HDTV out problem.

Rizmaster

n00b
Joined
Jan 14, 2006
Messages
49
I have a 6600GT, with DVI out as well as VGA and Analog out. I have a VGA monitor hooked to the VGA, and a DVI to component coverter on the DVI port.

I want the DVI component out to run to my HDTV (which supports all major resolutions) however it appears the box I bought from newegg (http://www.newegg.com/Product/Product.asp?Item=N82E16814999903) only works with ATi cards. That detail wasn't on the listing when I bought the card, and I bought it several months ago, so there's no hope to return it.

I've gone through the gamut of nView Display Settings, particularly custom resolutions for 720p NTSC. And I'm sure everything is configured properly, but alas no picture.

So I assume the box is not nVidia compatible. Anyone have any insight?
 
i highly doubt that its nvidia incompatable since the DVI connector is standardized. Make sure u have the correct componet wires connected to the right hookups on the connector. also a reviewer said that "Dipswitches set the displayable HD modes. I'd prefer it to be some sort of software thing" anything like that on it ? try a different display res.


UPDATE: just checked the manufactures site. there are little switches you have to set on it according to what is set in the nv display panel
 
Thanks for the reply.

And yes, there's a series of small switches on the top indicating what res. your HDTV supports, they're all turned on, as I have all the major res.

And the component cables are all connected properly. Trust me, I explored all the reasonably simple solutions before posting this.

I know the TV is okay, I know the cables are correctly connected, I know the switchbox is switched correctly and connected to the DVI. I restarted so it would be recognized by Windows as being connected.

nView Display Settings are set to multi monitor, and I've explored various custom res.

The ONLY gray area is that when I select multi monitors, I can only select my monitor and "Analog Out" Which obviously would be the S-Video out, but I get a scrambled signal so I don't know if that's part of the problem.
 
try booting ur comp with only the component connected and see if the POST shows. if it does its a driver setting
too bad my pc is really annoying to move or i would hook up the component from my VIVO cable to my downstairs TV and see what settings it takes.
 
I tried unplugging the VGA and it booted but the signal was scrambled on the TV.

nView has a 720p 59.94hz setting, but for some reason it doesn't work for me.
 
all i can think of is try setting the switches to 720p.. if that dont work then all i can do is scratch my head
 
Back
Top