Nothing after post..

[Heller]

basically, nothing is happening after my rig posts.

I had this built last week bt my mobo died after 2 days so now i got a new one and re built it etc.

Now on the last mobo )before it died) i nstalled windows on the hdd, got all my drivers and had a full y working computer.


now on this new build (new mobo) it posts and recognizes both myt sata dvd=rw and sata hdd.

it posts and then instead of loading into windows my screen stays blank (for however long untill i shut it off)

i then tried it it booting from a cd thinking i had to reinstall windows but same thing after it posts nothing happens just a blank black screen.


any idea what this is? i don't think anything is overheating cause inside the case is cool and the bios is reading my system @ 28* and my cpu @ 38*c.

here is my setup.

Q6600 G0 + Tuniq Tower
Abit IP35-E
2X1GB corsair xms 2 ddr2 667
160gb Sata II Hdd
Sata Dvd-rw
XFX 7900gt
antec neopower 520w?
antec p182

 

[gaspah]

try pressing whichever F key on your mobo gets you into your bootup menu... just to check that you are booting onto the device you want...

 

[Shen]

yes go into your bios and check your boot order settings
and you will need to reinstall windows.