Note to VNF3-250 Users

MLF

Limp Gawd
Joined
Aug 25, 2001
Messages
208
I have had the strange errors at post where different error codes are given each time and the bios seems corrupt. A new bios flash did nothing so I was getting frustrated. I could not get the system to post and was getting the same beep you get from a bad overclocking try but after 20 attempts to boot and letting the system sit and beep for several minutes I had no responce and the monitor was not getting signal. So I removed the atx connectors the memory and the cmos battery. I moved the cmos clear jumper to clear the cmos waited about 30 seconds and tried it repeatedly. Then connected everything but left the cmos battery out. So far I have run for 10 hours straight then reset several times and am going to continue testing with no cmos battery. If anyone figures out what is wrong with the VNF3-250 bios I sure would like to know.
 
The board ran for another 10 hours today with many reboots then after sitting over dinner the pc hard locked on return in the windows screen saver. On reboot it hung and now it is even flakier. Two new observations 1 the usb is so sensitive if you even move a connector it may not reboot unless you return all connections to their origional location. 2 The bios settings are not what they say they are in english and they do not have settings for half of the components, for example you cannot turn off onboard lan.
 
I have just fired off a suport form to Chaintech describing the problem and will keep updating this thread untill the issue is resolved as it appears many VNF3-250 owners are having similiar issues.
 
Finnally got the VNF3-250 working after about 3 weeks of errors and bios problems I have flashed to bios VN120430.bin and have been able to reboot error free for the first time since I got the board. I will stress test today.
 
uhhhh, are you a schitzo or something, you're the only one who's posted here, who are you talking to?
 
CodeWaste said:
uhhhh, are you a schitzo or something, you're the only one who's posted here, who are you talking to?

Stop trying to be funny, you just come off as F@*. He's just updating his post, and with good info. Do yourself a favor and log off this forum.
 
Any updates, I'm putting in my order in a week or 2 (DOOM3 is going to have to wait, current comp will shit its pants if it sees the box) And was thinking about that board or the Gigabyte GA-K8NS Pro
 
I have found even this bios to be faulty after a day of stable opperation it corrupted as all the others did. I am now trying to decide wether to look for a stable skt754 board or just wait and move on to skt939. I have given up on the VNF3-250.
 
could just have a bad board?

cause i already ordered a vnf3-250 a64 w/free farcry combo from zipzoomfly.
 
I decided to shelve the overclocking for a while or at least till I graduate and can afford another hardware failure. I just bought a K8T Neo FSR from MSI with the KT800 chipset locally for 129.99 and will see how well that works.
 
I suspect it is not a bad board because so far I have not found many people who have run the VNF3-250 stabily long term. Kyle himself asked me if I had RMA'd it yet when I had previously posted that it was working for the 3 weeks I first had it. If he has heard enough bad about the board to ask it I had RMA'd it yet when the board is only on the market a few weeks. It must be a more common VNF3-250 problem and not a fluke error in this specific board for that reputation to have been established.
 
I have the same board, no problems at ALL on this end so far except when i overclock too much :p

What is this new bios you speak of? I visited chaintechs site and it had only one and it was the same version I had (i think)

edit: your sig says Asus VNF3-250

Mine was made by chaintec
 
Back
Top