Norton Ghost / Raid 0 / Vista 64 Help

skypine27

Gawd
Joined
Apr 18, 2008
Messages
734
It's been a long time since I "ghosted" my OS drive to another drive when upgrading hard drives.

Well, I'd like to do it again (don't feel like going through the hassle of reinstalling everything onto the new drives)

This time though, I'm dealing with my OS "drive" being a Raid 0 setup and vista 64. The last time I ghosted was with Windows ME, using a DOS based Ghost Version, and it was from a single drive to a new bigger single drive.

Does the "new" Norton Ghost (14.0 I think) work well with Vista 64 and Raid 0 setups? My OS drive right now is a two x 500 GB drives in Raid0 (see sig) that I want to replace with two x 1TB drives in a Raid0 setup.

Are there any freeware/shareware alternatives to Ghost that will work with Vista 64 and Raid 0? I'm assuming any of these programs have to boot from a CD into some kind of DOS type OS so they can copy all the files, just like the old programs did.

Thanks for any info.
 
I think it will work since your coming from a raid-0 array. You would boot off the Ghost CD just like the old versions. I used it but it was kinda complicated, I think I actualy had to make the image from inside windows svae it somewhere, then boot off the CD to image the drive. But I might havebeen doing something wrong.
 
I use ghost quite a bit at work. I have had mixed success with raid. I have been playing with Acronis lately and thus far have been 100% successful. You could try creating a bartpe environment and using ghost in that. Google can guide you if that is your path. Acronis has a free trial, so try it and if it works, buy it.

Chris
 
I would not bet on a DOS based environment with an old Ghost working for imaging a RAID setup. It's complicated but you can setup a BartPE boot CD with ghost pre-installed as well as the SATA/RAID drivers which will almost 100% work but if you're not experienced at making custom boot CD's, integrating programs/drivers, this will take longer than reinstalling :)

The custom Acronis boot CD's will also have a high chance of working, especially since you have a very popular and semi-old ICH9R controller. If I remember correctly, the Acronis boot cd will have the ICH9R drivers embedded and you can use the "Full mode" boot and restore option. "Safe mode" might also work and access the drives through the BIOS. If you only see 1 drive when you boot into the Acronis CD, then it should be working. If you see each drive in the RAID 0 array separately, it's not working.
 
Thanks guys, will try Acronis when the new drives show up

this is the correct program right:

Acronis True Image Echo Server for Windows

Thanks again
 
I believe the cheap home version will work fine for what you need. It was floating around for $10 with coupon code last week somewhere.
 
yeah, just buy the home version. It should handle your needs fine. I purchased it after verifying that it worked with the trial. It's good for 15 days, I believe. Nothing like try before you buy :)
 
Back
Top