Noritake 256x64 VFD module Group Buy

The_Sub

n00b
Joined
Dec 4, 2003
Messages
21
I wasn't too sure as to where to post this. However, it must be said. A few of us over at Bit-Tech are trying to get a group buy on these VFDs going. Were running into a few problems though. WE NEED MORE PEOPLE!! If you are interested in this contact Morphine from the BT Forums at the following addy...... vfdgroupbuy@crossfiregaming.com

This is the thread that we have going at Bit-Tech about these displays.
Here is the data sheet on the display.

Software support is being worked out right now and shouldn't be a problem. Hopefully we can get this done, because the display has a lot of potential. The seller is currently trying to sell the displays one at a time on eBay and has already sold one of quite a few. Like I said though contact Morphine with your interest and post any further questions here or at Bit-Tech.

to the mods... If I posted this in the wrong area please move it a necessary and I appologize for any error made.
 
What kind of price are you folks going for?
 
That datasheet is very compact, and by the sound of the bit-tech thread there is no software for it ATM. Looks like they're hoping for $50 ea.

I am interested, but I'd like to see a more detailed data sheet (if there is one) and a picture before I decide for sure. My purchase would also be contingent on there being some software written for it. Since Henri @ b-t might be writing some, if he made the source code available so that we could customize it a bit, that would be even better.
 
Yes the price we are hoping for is $50. That is what the guy is starting the bids at on ebay. The prices may be as high as $100, though nothing is set in stone yet. As for the software, well Henri with LCDInfo will be working on it as soon as he gets a display. I think that he has one on the way but am unsure about this. I, personally am not too worried about the software support, it'll happen. That data sheet is the only one that I have atm. However, if you go to the Noritake website, I think you may be able to get a full data sheet. I have been having troubles doing it.
 
I'm interested in at least two, up to six, given that the final price is around $50 per VFD.
 
Well. Just make sure you email Morphine at vfdgroupbuy@crossfiregaming.com and let him know your interest. I recieved the full data sheet for the display from Noritake today. I am not sure if this will work since I don't have a web sever, but I uploaded it to my little space at Uploadit.org. If you can't get to it and you want it email me at cpl_somer@cox.net and I'll email it to you. Just remember that the final price, as far as I know, hasn't been set. I haven't heard anything from Morphine about it yet. I believe that it wiull be in the range of $50 - $75 though. Still it isn't too bad of a price if it goes to $100, considering you can get them same display from DigiKey for $300.
Any more Q's? Post it here or at Bit-Tech.

/edit/ I removed the link to the data sheet and sent it to phasmatis_nox so that it may be properly hosted./edit/
 
hrm... looks very interesting given the price they go for on digikey... i'd be interested, but i'd need a set price first.
 
@ phasmatis_nox -- Thanks for hosting the file. I had some problems sending it to you through the cox.net mail servers so decided to go with hotmail. good ole standby. hehe

@plot -- I think that it'd be a really good display considering the ease of hook up of VFDs vs LCDs.. Like you don't have to worry about power for back lighting and such. Don't forget about all the great graphic gooey goodness!! :cool: As for the price.. Well.... I emailed Morphine about it again to see if he had heard anything from the seller about a solid price. We'll see what happens. I think that the more people that we get involved, the cheaper it will be.
 
The four brightness levels interests me. That could make for some neat animations. Did the GU128x64-800A have that? And can this VFD do bitmap conversions like the GU128x64-800A?

I already have six of the GU128x64-800As, so I'm hoping that this VFD has comparable or better features.
 
Howdy folks. i got 2 of those VFD's coming my way, one of them goes to Henri, author of LCDInfo. Datasheet check from him shows that there are no real hurdles of getting it to work wiith LCDInfo. But we'll know for sure in about 2 weeks.
Stay tuned.;)
 
I'm not sure. Apparently the seller has told coorz via e mail that he only has about 20 left. Even though he knows that he could sell all of them pretty much immediately through this group buy, he keeps listing them on eBay. He has only listed the displays 3 times on eBay and has already sold something like 25 of them. Since I haven't been in contact with the seller I can't say much as to what is going on. I am trying to find out though. As soon as I hear something I'll post it here. Sorry I can't give you any better news.
 
That's confirmed, the seller mailed me that he only has 20 left.
So either Morphine contacts him to, kindly, hold on to those 20 for a week or 2. Or we start the group buy now and risk the chance of not getting it to work.
I'll be getting my 2 VFD's this week (i hope), have to ship one to Finland to Henri. So hopefully end of this week / beginning next week we'll know whether it works or not.
 
Update?

On the topic...
vfd.jpg

Good deal? Would I be able to find freeware to run it?
 
Yeah, there are a few available applications that already run that VFD in synchronous serial mode. You can find more information at VFD World:

http://www.vfdworld.com/index.php?page=usingyourvfd

Reference (BGMicro) IEE 03602-122 2x20 VFD. If you have any other questions just ask; I own one and could help you out too.
 
Anybody know if the backlight colors in the these can be changed easily? Is it as easy as changing a few LEDs?
 
You mean those VFD displays? In that case no, they have no backlight. Changing appearance colors is a matter of using colored filters.
 
* minor UPDATE *
Should be getting my 2 VFD's tomorrow. It appears the seller has stopped listing them on E-Bay. Don't know if he's sold out or someone asked him kindly to hold on to them, awaiting our group buy.
Hopefully end of this week, Henri will have the word out if it works or not.
 
Originally posted by xonik
Yeah, there are a few available applications that already run that VFD in synchronous serial mode.
Actually it is asynchronous RS232. Synchronous would require at least one more wire to provide a clock (and it would also likely need a chip select/enable).

-special [k]
 
Thanks for the info! I downloaded some software for it from a link earlier in the thread.

Anybody know how long BG micro usually takes to deliver?
 
Originally posted by specialk
Actually it is asynchronous RS232. Synchronous would require at least one more wire to provide a clock (and it would also likely need a chip select/enable).
Right, thanks for the reminder.
 
Originally posted by specialk
Tehehe!
Remember when I first found the BGMicro VFD (and it was for $20?)... I tried searching for the thread, but alas, it seems as though it was lost to a forum update.
The old thread (now gone): http://www.hardforum.com/showthread.php?s=&threadid=351627
Archive of only the 1st page: http://web.archive.org/web/20020616112810/http://www.hardforum.com/showthread.php?s=&threadid=351627

The thread ended up being 110 pages long :p

-special [k]

they cost more now, and look pretty big.. removed from medical equipment. backlit? it's not bad just for a VFD to mess around with.
 
*UPDATE*
Got the VFD's in last week Wednesday.
n256.jpg


The bottom one, obviously :D
As i type this, Henri is busy getting his one to work in LCDInfo.

I just hope it's not too late for a group buy :rolleyes: .
 
Back
Top