I recently purchased parts to build a cheap, yet powerful computer. I'm using a Shuttle MK40V/VN motherboard coupled with an AMD Sempron and Radeon 9600Pro.
I've install all the components... hooked up the front panel connections and set the FSB to 133mhz using jumpers. (Also Tried 100mhz)
I've also tried booting the machine without the videocard, using the integrated video. Still no go, even after resetting the Bios.
I've tried Corsair, Kingston, and Mushkin Ram in the machine, but still no video. Upon powering on, the CD-Rom drive light blinks, as does the Harddrive light... which then remains on. Still no video. I had a similar problem on a Shuttle SFF SN41G2... and the problem was with the ram.
Any ideas on how to solve the no video problem? Is there a conflict between the Sempron and the board?
Thanks,
Steve
I've install all the components... hooked up the front panel connections and set the FSB to 133mhz using jumpers. (Also Tried 100mhz)
I've also tried booting the machine without the videocard, using the integrated video. Still no go, even after resetting the Bios.
I've tried Corsair, Kingston, and Mushkin Ram in the machine, but still no video. Upon powering on, the CD-Rom drive light blinks, as does the Harddrive light... which then remains on. Still no video. I had a similar problem on a Shuttle SFF SN41G2... and the problem was with the ram.
Any ideas on how to solve the no video problem? Is there a conflict between the Sempron and the board?
Thanks,
Steve