no video but correct post beeps.....

AMDOPTY

Gawd
Joined
Feb 28, 2007
Messages
624
just a few hours ago the rig in my signature just "kicked the bucket". When i tried to restart it, i get one the normal succesful post beep but no video. it died with a nvdispl.dll error so i figured the video card was the culprit, however after taking the video card down to the local computer shop to get it tested it works fine in their system.

this leads me to believe that it is a problem with the power supply or ram, maybe the motherboard. im hesitant about blaming the motherboard because when i try to post without the video card or ram i get the correct sound error codes. ram has also been switched around but no changes.

because i have no secondary system to test the parts in, i am tempted to take the whole system down to the same computer shop and use one of their setups to test my hardware.

either way if anyone has any solutions or knows if this is a common problem with a similar hardware configuration.

when diagnosing please assume that i have tried all of the normal postmortem procedures. (clearing cmos, barebone boot, etc)

thanks in advance:D
 
Run memtest and see what that comes back with... and let it run for at least 24 hours.
 
that would probably be the first thing i would plan on doing. however i cant even get the rig to display a post message.
 
Umph... um, yeah...sorry about that.

I know you said that you switched your ram around..have you tried with only one stick?
 
Back
Top