no post after trying 250mhz fsb

Joined
Jun 29, 2004
Messages
2,352
ok i was just OC'ing my winchester and i found out that the rams limit was 245mhz@2-2-2-5 with stock voltage. i tryed for 250 and it wouldnt post and when i tryed clearing the cmos this time it still wont post im worryed i fried it but the cpu ran @ 35C idle at 9x265 with the ram at 2.5-3-3-6. vcore was 1.5v
 
yikes!

Im sure you unpowered the computer, pulled the battery out, CMOS reset by jumpers and tried to reseat everything?

PSU?
 
well i reseating the video card and ram, i tried the jumper like 5 times but i never had to remove the battery to clear the cmos before when it wouldnt post cause when the ram was in slots 1&3 wouldnt run 1T. so does the battery make the difference?

psu is a fotron 500w blue storm. im guessing since my board undervolts vcore that the high clock may have done something to want more stock voltage?(under volts .10 so 1.50 vcore becomes 1.40)
 
heck, I've seen stranger things so yeah, remove it. And maybe try taking one of the memory sticks out.
 
Back
Top