No boot - Help

jcll2002

2[H]4U
Joined
Jan 28, 2006
Messages
3,655
I just took out my pump and (after replacing it with air heatsinks last week...did the pump today. would boot before i changed the pump) I can't boot. It goes all the way to the loading windows screen and it just pauses on after a few "swipes" and hangs. If i press the restart button on my case it just hangs there.

Any help?

I did unplug a few power cables but i checked that they were plugged back in.
 
When the Windows bar is loading, its loading devices and drivers, Did you change the setup at all? Try removing all PCI Cards and anything extra and boot. Windows is hanging on a driver or file for something. Also make sure to reseed your video card and such.
 
in device manager while in safe mode i get question marks on these items:

? Multimedia Audio Controler
? Other PCI Bridge Device
? PCI Memory Controller
? SM Bus Controller

i dont know if this is even relevent.

EDIT: ok so disconnecting the pci cards didnt work. But i tried again and i booted. I got into windows but after 2 minutes it just froze and I had to restart and I can't get back in.

Also the internet wasnt working because the device wasnt working (which is pci)
 
in device manager while in safe mode i get question marks on these items:

? Multimedia Audio Controler
? Other PCI Bridge Device
? PCI Memory Controller
? SM Bus Controller

i dont know if this is even relevent.

That means the Drivers are not in for those devices or they wont start in safe mode. Odds are that the drivers are gone. Maybe why it wont start in normal mode. Delete the devices in safe mode then restart it. Windows should load
 
it was the network card. It budged out a little i think when i was carrying the case and I overlooked it.

Thanks for your help!
 
Back
Top