NH-D14 2011 Assistance

Sanford

n00b
Joined
Feb 19, 2008
Messages
31
Hey Guys,
I was wondering if I could get your thoughts on this. I tried installing the above cooler on my build and every time I'm running I get a Machine_Check_Exception BSOD error.

My specs:
- i7-2600k stock
- Asus p8p67 (deluxe - I have the NM-13 mounting kit)
- 16gb corsair memory (tested with memtest86+ 4.20) all passed
- Crucial M4 128gb
- GTX 670 (stock)
- FT02 case

Random information:
First time installing it i was getting cold boot and low rpm cpu issues, fixed it by updating bios and disabling q-fan in bios.
I then proceeded to install a clean copy of windows 7 x64, it crashes when it begins to expand files. Rebooted and tried again and it installed.

Since the installation I have continued to get Machine_Check_Exception.

I have 4 sticks of 4 gb, I decided to run prime95 to test for stability with the new cooler.
-8 hours on a set of 2 of the 4 sticks of memory no crashes​
-6 hours on the other set​

I have unplugged the y-cable and plugged each fan in one cpu plug and the other on a chassis plug (still crashes)

I tried using an old scythe fan SFF-21E, thinking that the included fans were faulty, still crashed.

I have gone back and forth between my old Thermalright Ultra Extreme 120 and the new NH-D14 cooler, every time the NH-D14 is installed I get BSOD within 2 hours or less of use. I played BF3 campaign for an hour no issues stopped and surfed the internet then it crashes

Finally, prior to all of this I was using a Thermalright Ultra Extreme 120 with the SFF-21E, it was overclocked to 4.6 and had no instability issues at all

I know the post is long but I wanted to provide as much info as I can. I can no longer return this as I have passed my 7 day window (I was waiting for the mounting kit). Is it me or is it really possible that a cooler is causing my computer to crash? It just unheard of (unless its not seated properly) which it is in case your wondering ;)
 
Have you tried running both the fans directly off the PSU and bypassing the mobo power completely?
 
Thanks for the reply; no but I will try that. But I did use a different fan (SFF-12E) also caused a crash.

I was also thinking that I would remove the rubber feet on the back bracket to reduce the tension on the mobo. I'm gonna give it a shot and see.
 
I wouldn't change the feet. Just don't plug the fan into the mobo. My guess is that the voltage is causing instability. Bypass the board altogether.
 
I left them on it doesn't fit without out it. Besides I'm an idiot any way, I realized that the backplate was oriented incorrectly...derp! I corrected that and with some help from my cousin i ended up having to boost the cpu voltage since the processors has been oc'd for so long it wouldn't run on such a low voltage. As of now all is stable.

Goros, thank you for responding today
 
Back
Top