NF7-S Sata booting issues, can't use USB floppy?

Zyzzyva100

[H]ard|Gawd
Joined
Feb 26, 2001
Messages
1,204
My girlfriend just helped me build her new computer tonight, and everything seemed to be in order after we put it together, so we went to install windows. Thats where the problem started.

Her boot drive is SATA, and her old drive that is PATA is in there too, but is using the serillel adapter that came with the board. Apparently the SATA controller is a raid controller too, and while it sees the drives, I guess its drivers must not be native to windows.

In all my years of building computers, I have actually never had to use the F6 option, because I always made sure that my scsi/raid etc controllers were lsi, and therefore the defaults on the windows CD. I have the disk with the drivers on it, but I only have a usb floppy drive. Apparently windows doesn't see the USB drive, or doesn't see it as A, because I can't seem to use it to install the drivers.

I know lots of other people on here are using the NF7 with a mobile chip (Like this machine), so im wondering if anybody found a way around this, if they too were using a USB floppy. I mean, I haven't had a regular floppy drive for years. So any help would be much appreciated. I'd rather not have to go buy a damn floppy because this board won't see a USB floppy that early in the boot cycle.
 
Seems like if the board can't 'see' the USB floopy, you're screwed. I don't think there has ever been a USB boot option on the NF7 boards :rolleyes: . You're just better off shelling out the $10 to get a regular old floppy drive, and just hook it up on those occasions that you need it.

/me hopes if/when Longhorn actually sees the light of day that Billy boy either adds basic RAID driver support into Windows (ie: the common Silicon Image/others), or allows USB/CD loading of the drivers @ least..Its about damn time.

[edit] Maybe someone more knowledgable can chime in, but perhaps you could slipstream the SATA driver from the floppy onto the install CD, and have it load w/ the other RAID drivers on setup startup?
 
Check the bios. I bet there should be an option for "legacy USB" devices. Try enabling that if it isn't already.
 
jcurry said:
Check the bios. I bet there should be an option for "legacy USB" devices. Try enabling that if it isn't already.

Hmmm, I could try looking for that. I ended up finding a working regular floppy drive in my box of random computer shit, so I got it now. Thanks for the replies though.
 
Back
Top