NF7-S Problem

Plutonium

n00b
Joined
Jan 5, 2004
Messages
2
Alright well it all started when i put in my AMD XP 2500+ and this aftermarket heatsink on. Well, the computer would boot up to where it would check the IDE drives, then totally die, leaving me with nothing but a beeping noise (like the noise you get when it overheats) so i figured, hell maybe it just is the heatsink, so i switch out the heatsink back to stock and get the same problem. Eventually it starts working, for whatever reason. Now i came back to the same problem where it wouldnt boot, it wouldnt even let me access the bios, it would start up, right as i was getting picture it would crash and beep. So i figured hell, ill RMA it, maybe its a motherboard problem. Well finally my motherboard arrives in the mail today, i hook everything up, and what do you know, i get the dreaded Beep. What could be causing this. Anyone?

Im running an AMD 2500+ w/ Buffalo 3700 512 meg DDR
 
definately sounds like an overheating problem, try flashing the board to the current bios and put some AC3 on the processor. make sure everything is seated nice and tight and the fan is on.
 
do you have any thermal grease in there?
try booting up ur computer on it's side (open side up) maybe the HSF is not getting proper contact with the CPU
 
Back
Top