NF7-S problem

Leb_CRX

Gawd
Joined
Sep 25, 2003
Messages
567
I been having the worst frigin luck since the start of the year, anyways I ended up frying a system on the first of the year because I put a stick of ram in backwards, I was in a rush and what not and it totally messed it up...anyways fast forward to 16 days later, today, I made some BIOS changes to my nf7-s (changed ram timing) and it wasen't booting up so I cleared the cmos, and I put it back to stock timing, and I hit save and exit and shut off the power right away because I forgot one of the fans...after doing so I realized i didnt give a chance for the BIOS to save...now the thing wont boot up...I highlty doubt this, but is there any workaround that?? I tried clearing the bios and that's not helping me at all...anyone have any other suggestions or anything? :( :( :( :( :(

I need to stop touching computers altogether
 
You might of killed your Bios Boot Block, You need to reprogram your bios or RMA your board... Good luck Abit's RMA has been screwing with me for 19 days, still haven't recieved my new bios chip... Everytime I call they say they shouldn't of sent me the chip by it's self, and I tell them It's too late now.
 
You probably toasted it.

RMA or Get a BIOS chip.

Good luck.
 
Don't feel bad. I scratched the top outter layer of the southbridge off of my motherboard without any clue. Don't knwo how it happened but I do know that it won't give me any video.
 
do the reset cmos jumper thing, then hold the insert key as you power up. this will likely fix it.
 
Clearing the cmos and just booting up without and keypresses is different then clearing cmos and booting up with insert held?
 
try clearing cmos and without the AC coneccted try to switch on the computer..... then reconnect the AC power and try to swith on with the insert key pressed....
and good luck.....
 
Originally posted by topslop1
Clearing the cmos and just booting up without and keypresses is different then clearing cmos and booting up with insert held?

The nForce2 chipset itself has a different bios reset routine than any other chipset, it requires that you both do the jumper, and then softclear it by holding the insert key upon bootup- this is unique to the chipset, but solves many problems.
 
Thanks for the replies guys, I actually called the store that I bought it from and told them it was defective...walked in there pretending like I dont know shit (not that I really do) and told them my friend who's a computer tech (dosent exist) told me that the board dosen't post, and pretneded like I had no idea what was going on, even asked the guy what does post mean...haha...they tested it, told me yep it's bad and sent it back to abit...I really feel bad for doing this, but RMA'in it would of meant no computer until I get it back...which I am not willing to live without, so because I was still covered under warranty I had to take advantage :)
i'll keep that insert key in mind in case I n00b it up again

Thanks again
 
You should be ashamed of yourself.

<insert diatribe of explicatives here>

You are costing not only ME but EVERYONE ON THIS FORUM their hard earned green by doing what you did. Your problem was user error, and not a MANUFACTURING DEFECT. You should be taken out back and shot. Somebody please ban him from this place.
 
Originally posted by Schro
You should be ashamed of yourself.

<insert diatribe of explicatives here>

You are costing not only ME but EVERYONE ON THIS FORUM their hard earned green by doing what you did. Your problem was user error, and not a MANUFACTURING DEFECT. You should be taken out back and shot. Somebody please ban him from this place.

Ok when I get home tonight, i'll proceed to shoot my brain off :rolleyes: :rolleyes:

asshole :eek:
 
I dont blame him at all.

Abit has a shitty RMA policy.. I have a NF7-S Rev 2.0 right now that crashed last night, now it wont boot, when I hit the power everything flickers for a second then nothing.... To have this board replaced I have two options

1. Send Abit 25 dollars, Mail my board in (I pay shipping), wait a month or more, get new board in mail.

2. Send Abit 25+7+150(deposit). They charge all of it instantly, and mail me a new board. When I get the new board back I have 30 days to return the defective board (of course I pay shipping) and once the board has gone through a full inspection I get refunded the 150 dollars.

This will be the last Abit board I ever purchase.
 
Originally posted by Schro
You should be ashamed of yourself.

<insert diatribe of explicatives here>

You are costing not only ME but EVERYONE ON THIS FORUM their hard earned green by doing what you did. Your problem was user error, and not a MANUFACTURING DEFECT. You should be taken out back and shot. Somebody please ban him from this place.
Calm down a bit. (hehe a bit -- abit, funny joke...)

I agree with this stance when someone frys a volt-modded radeon trying to custom cool it with dogpiss and liquid nitrogen and cracks the chip in half or something.

But this guy just swapped merchandise instead of RMAing. He didn't permanently destroy the board - abit will flash a bios chip, swap it in - then send this board back to the shelf as factory refurb. Not really a big loss for them. The only thing this guy cost the store was the price of shipping the board to abit...
 
I've never had to pull the battery and press insert as well as the reset jumper. I just turn off the power, reset the jumper wait 10 seconds then put it back. Apply power and away I go.

Who knows.
 
Back
Top