hrsetrdr
n00b
- Joined
- Mar 23, 2003
- Messages
- 15
I have an NF7-S (v.2.0) with an xp2700 processor which I did the "5th L3 trace bridge" mod prior to installation. My main activities with this rig include attaining the highest 3D mark possible with my gf4 ti4200. As of this writing, I've gotten my 3dmark 2001 score to 13267. I've enjoyed using the various features of my NF7-S board in countless combinations to try to improve my 3d marks...different multiplier settings, cpu/fsb/dram ratios, memory timings and such; as I write, I recall not having tried differant AGP frequencies, from the default setting of 66mhz.
But, I've also had some frustrations with this rig...can only reach about 217 fsb(over fsb of 205, 3d marks drop like a rock!). Also, when experimenting with merely raising the internal clock, I can only get about 125 mhz OC before booting to XP takes a crap!
I know this board has an excellent reputation, so I have to conclude that there might be a problem with the processor. I am wondering if the L3 mod might be holding back performance in some way...?
I'd appreciate any thoughts on this matter.
BTW, System specs are:
Abit NF7-S v.2 (BIOS v.18)
XP 2700
Visiontek gf4 ti4200 128mb ddr
1024mb Corsair XMS pc3200
(2) W.D. 36.7GB Raptors @ RAID 0
Antec 450w psu
Win XP professional
But, I've also had some frustrations with this rig...can only reach about 217 fsb(over fsb of 205, 3d marks drop like a rock!). Also, when experimenting with merely raising the internal clock, I can only get about 125 mhz OC before booting to XP takes a crap!
I know this board has an excellent reputation, so I have to conclude that there might be a problem with the processor. I am wondering if the L3 mod might be holding back performance in some way...?
I'd appreciate any thoughts on this matter.
BTW, System specs are:
Abit NF7-S v.2 (BIOS v.18)
XP 2700
Visiontek gf4 ti4200 128mb ddr
1024mb Corsair XMS pc3200
(2) W.D. 36.7GB Raptors @ RAID 0
Antec 450w psu
Win XP professional