NF7-S not recognizing RAM

DrunKBunny

Limp Gawd
Joined
Feb 1, 2003
Messages
130
Just put together a new system and it will not POST, giving long beeps (continuous) which points to a ram problem. I have 2 sticks of 256mb pc3000 kingston hyper X, and I have tried running them in every combination possible, as well as just with 1 stick.

I have also tried running with a stick of my friends samsung pc3200, but that does not work as well. I am thinking the board is no good, probably have to go back tomorrow and get a replacement. Anything else I can do?
 
There's plenty to do.

First- its never a dead board unless you personally b0rk3d it.

Second- I highly reccomend thatyou take the board out of the case and power it on an anti-static mat to test it, to eliminate idiot factor with regards to mounting the board.

Beeping means your processor is fine.

Look at the memory traces between the NB and RAM- have youslashed any of those?

Please don't try to hassle the shop or store that you got it from until you have determined that it is a dead board due to no fault of your own. It really pisses me off when people who try one thing in the troubleshooting world narrow it down to being a bad motherboard immediatly and return it, just to watch in horror the shop tech boot it right up before their eyes.

The other thing, if there is a skid mark across the memory trace from a metal object of yours, please do the honorable thing and PURCHASE a new one, because if you RMA a board that you b0rk3d, you are making me and everyone else here on the forums pay for your mistakes through the increased price of motherboards due to increased costs of the RMA process. Boards are tested before they are shipped, so there's no reason to have a deadboard arrive.

I sold hundreds of mobo's in 2003, and personally assembled about 150 machines, without a single dead motherboard from any source (not counting the idiots who didn't use standoffs in their case and cracked the board in half, etc).
 
Originally posted by Schro
There's plenty to do.

First- its never a dead board unless you personally b0rk3d it.

Second- I highly reccomend thatyou take the board out of the case and power it on an anti-static mat to test it, to eliminate idiot factor with regards to mounting the board.

Beeping means your processor is fine.

Look at the memory traces between the NB and RAM- have youslashed any of those?

Please don't try to hassle the shop or store that you got it from until you have determined that it is a dead board due to no fault of your own. It really pisses me off when people who try one thing in the troubleshooting world narrow it down to being a bad motherboard immediatly and return it, just to watch in horror the shop tech boot it right up before their eyes.

The other thing, if there is a skid mark across the memory trace from a metal object of yours, please do the honorable thing and PURCHASE a new one, because if you RMA a board that you b0rk3d, you are making me and everyone else here on the forums pay for your mistakes through the increased price of motherboards due to increased costs of the RMA process. Boards are tested before they are shipped, so there's no reason to have a deadboard arrive.

I sold hundreds of mobo's in 2003, and personally assembled about 150 machines, without a single dead motherboard from any source (not counting the idiots who didn't use standoffs in their case and cracked the board in half, etc).

Ah the voice of reason and experience.

Preach on. :D
 
Originally posted by Schro

The other thing, if there is a skid mark across the memory trace from a metal object of yours, please do the honorable thing and PURCHASE a new one, because if you RMA a board that you b0rk3d, you are making me and everyone else here on the forums pay for your mistakes through the increased price of motherboards due to increased costs of the RMA process.

:eek:

OMG, reason sounds these halls.....

:p
 
Just a thought, but I was the production manager for an Intel Premier Provider.

I've built several thousand machines

and there is such thing as a bad board out of the box
 
Originally posted by velocitypimp
Just a thought, but I was the production manager for an Intel Premier Provider.

I've built several thousand machines

and there is such thing as a bad board out of the box

I totally agree that its a possibility to get a board that is bad out of the box, however, after two years working at a shop where time and time again people bring back the motherboard, and claim that its a bad motherboard, just to have me go back to the shop and fire it right up, or to point out the wonderful physical damage that they applied to it in their feeble attempts to "build teh computar!!!1"

In otherwords, for every claim of a dead motherboard that I see at work (and in general, on these forums) has to do with user error some sort, and it quite honestly pisses me off that I have to pay for their mistakes indirectly through the increased price of motherboards due to the extra costs of the RMA process when they could have discovered that the board was fine with more through testing.
 
Back
Top