NF7-S ideas?

Fully_Sik

Weaksauce
Joined
Apr 17, 2003
Messages
114
Hey fellas i got my Abit NF7-S Rev 2.0 this morning, installed up and formatted and i can hit 2300mhz quite easy on my 2500+ (11x209) @ 2-2-2-11 with my ram @ 2.7 (gotta love this xms3500 ram) and vcore @ 1.75v. Currently i am sitting @ 2.2ghz and 1.625V before it craps out.

1) Anyways i'm just wondering should i run the memory with the 6/6 divider or leave on auto?

2) Any other tweaks or settings i need to know or be aware of? Like CPU Interface disabled or enabled?

3) What u think the max vcore i could use with this SLK800 with a 80mm fan on the heatsink and 2 80mm case fans? Also should i use max Chipset voltages??

4) I am using the latest official BIOS from abit. Any others i should use like tictacs?

Cheers for any help
 
Auto, Enabled, and I'll let you know about the BIOS if/when I get a floppy drive.
 
Personally, I don't see what the difference is in running the memory in auto or one of the many 1/1 ratio's.. The cpu interface will give better performance, but it will limit your max oc.. play with it to see what works better

there are quite a few modded bios's out there right now.. go over to nforcershq.com/forums and go to the abit forums.. the newest modded bios's are stickied there..
 
Back
Top