NF7-S doesnt unlock my 2500+...

yroc

Limp Gawd
Joined
Jun 24, 2004
Messages
131
I thought i read somewhere that the multiplier would be accessable regardless of what the chip was set too... I ordered a new 2500+ when i built this new rig and i cant change the multiplier all i can change is the FSB which is nice and all but i want to see what i can get outta different configs...

anyone else run into this problem with their processor and this mobo?


NF7-S v2
512 DDR400 kingmax
80gb hitachi SATA
2500+
msi 9800 pro
 
If you got a new 2500+ it will be locked...

the mobiles are unlocked and the old xps
 
CSx-2011 said:
If you got a new 2500+ it will be locked...

the mobiles are unlocked and the old xps

Yes, as he said...the later models of 2500+ come factory locked because of the amount of overclocking being done to them. If you can get us the codes from your chip, we can run those for you and find out if its factory locked or not (which I am almost 100% positive it is anyway, because my NF7-S/2500+ combo worked flawlessly).
 
well fuck a duck i wanted to overclock... itll run as a 3200+ fine, which is what i was planning on doing anyways, but i wish i could make the multiplier go up... grrr

also with this mobo if i want to up the FSB what do you suggest i use for DIMM voltages and Vcore ???
 
All 2500+'s after week 45 '03 (and most from 35-45) are locked...

vCore will need to be raised if your system in unstable due to thep rocessor faulting...

Generally 1.85v is considered the safe upper limit for aircooled boxen

vDimm should be raised if your RAM is being massivly overclcoked and can't keep up....

Generally 2.8v is considered the safe upper limit for all ram

NB voltage should be raised for high fsb overclocks

Hmm... I think you'd be able to crank this up as far as the bios will let you and it'll still besafe..
 
Back
Top