NF7 reports VSB low?

Chaballaman

[H]ard|Gawd
Joined
Jun 26, 2001
Messages
1,515
I got two NF7-S mobos, according to Abit Hardware Doctor one of the VSB is running low, it was all the way to 4.51v when i booted up then when up to 4.63v.. other system seems to be healthy at 5.04v.

What is VSB? do I need a new PSU on system with 4.51-4.63v VSU?

edit:
now its runnin 4.68-4.70v (its been on for about 30min now).. is this normal for VSB voltage to slowly increase after a cold boot?

edit:
now its at 4.73v after about 2-3hrs..
 
VSB is now at 4.78v, but the -12v seems to be unstable, range from -12.00v to -13.00v. other psu i have stays at -12.78v on -12v.
 
the -12V rail isnt very important, it going up to -13V is not a big deal.

its the +12V rail you worry about.
 
You have the same kind of psu on both boards and what kind of psu is it?
 
one is 250w aopen psu about 2 years old, other one is 400w antec psu 2 months old.
reading on aopen one is bit jumpy.. but this psu has been runnin stable with all the systems i had..

edit: umm +12v on aopen one is kinda low, 11.56-11.62v..? antec one runs 12.05-12.11v..
 
Back
Top