NF7 Dual Channel Memory Config

NoEcho

2[H]4U
Joined
Aug 14, 2001
Messages
3,250
Setting up an Abit NF7 for dual channel. Got two questions:

1) should it be banks one and two or one and three?

2) there any jumpers or bios switches I've got to throw/activate for dual channel memory management?
 
1. use the two slots to the right, can't remember which ones they are

2. no jumpers necessary, does it automatically. when your pc POSTS, you'll see it, it'll say " DUAL CHANNEL" in white bold letters
 
What he said. The two slots to the right are 2 and 3.
 
u mean the 2 slots closest together?


cuz the slots are like this


|1||2| |3|.
 
Originally posted by Yankeez
u mean the 2 slots closest together?


cuz the slots are like this


|1||2| |3|.

No. The way you have it drawn, you want either 1/3 or 2/3. The two close together are on the same mem controller. The one by itself is on the other.
 
Yeah, what they said, slots 2 and three. If you look in the manual, it shows a diagram which slots are which. Also on the motherboard, there should be white writing beside each slot /w the numbers there. (usually are, but im not at home so can't check)

A question for some people... when u have a dual chanel config, can you add another stick of ram, and the dual will still work properly? or will it fall back to normal, half speed config? So for those people with 2X512MB, the next ram upgrade would have to be 2X1024MB...
 
Back
Top