NF4 IDE Crash

S

stonedwaldo420

Limp Gawd
Joined
Mar 30, 2005
Messages
505
I have 4 hard drives: 3 SATA Seagates and 1 200GB PATA Maxtor. Whenever I connect the Maxtor, my computer blue screens during windows startup (MACHINE_CHECK_ERROR), and restarts itself about 5 seconds after the blue screen.
I only have this problem when I connect the PATA Maxtor. I have tested this drive in other systems and in my external USB enclosure and it works just fine. Obviously, my OS is not loaded on this drive either.

I have a DFI NF4 SLI DR motherboard running the latest NF4 chipset drivers.
Anyone else have this problem, or a solution to it?
I am thinking that it has something to do with the NF4 IDE controller.
 
Same problem. It works perfect when I connect it after windows starts up. I thought I fixed it by setting it from auto/lba to Large because it booted fine I tried a restart and it blue screened. It's a 160GB WD 8MB. I am going to try a few things tonight and see if I can get it working.
 
If i uninstall the drivers for the NVIDIA nForce4 Parallell ATA Controller, do you think that will take care of the problem?
 
Sweet, it worked!! thanks a bunch man.

My only question is, now that i don't have the IDE driver installed, will DMA still work?
I am guessing that it would since the whole concept is for it to be hardware based.. but just wanted to make sure.
 
You must log in or register to reply here.
Back
Top