newer quad 1366 procs - when?

This was a good discussion and I was interested as I have not had the time to look at the two new standards.

Rule 1.
Mutual respect and civilized conversation is the required norm.

If the math was so "easy" it would be much more effective for presenting your point of view to give the math in a post than to start posting like above.

Calculated "theoretical" speeds mean nothing to most people, its real world throughput that matters but I would have been interested in a discussion of both. As I said, it was an interesting discussion with the potential to provide enlightening and useful information about the upcoming new standards.

Now it is just a steaming pile of poo. Good job E.R. :mad:
 
The best solution, of course, is for Intel to finally release the ICH11 with real SATA 6Gbit support. And I'm guessing that'll happen within 6 months judging by their historical release cycle on the ICH southbridges. If you need to build now I suggest a cheaper board such as the EVGA SLI LE or the ASUS P6T (the vanilla version, not Deluxe) as a temporary board until ICH11 is released and boards are available.

Don't hold your breath here. DMI isn't fast enough to support SATA6GB or USB3 at any major level. DMI has a bandwidth of 1GB/sec (4PCIe1.0 lanes), SATA6 has a bandwidth of 600MB/sec (probably 500-550 in practice judging by current SSDs bottlenecking), USB3 devices are expected to be capable of 300MB/sec real world performance. Doing anything beyond what several board makers have done recently will bottleneck DMI badly. \

Unless intel replaces DMI, overclocks it, or moves SATA6/USB3 to the north bridge a widespread rollout isn't going to happen. The same problem stands in the way of deploying PCIe2.0 on the southbridge. With PCIe 3.0 pending in the near future I suspect DMI will either be getting replaced or the southbridge and northbridges will be merged and connect via QPI.
 
getting back on topic...

http://techpowerup.com/110567/Intel_Readies_13_Westmere-based_32_nm_Xeon_Processors.html

March 16th for Xeons. Q3 for non-Xeons

Q332nmquadcore.jpg
 
No, don't bother paying extra for useless USB 3.0 and SATA 6Gbit support. There is only one USB 3.0 and one SATA 6Gbit controller (from NEC and Marvell respectively).

Funny guy... Ever heard of SSD drives? Rest assured USB 3.0 will catch on before too long as well..

That said, I think the OPs current system is good enough to hold out if there is something coming relativly soon down the line. OCing the Q6600 to arond 3GHz can go a long way in making the wait less painful.
 
Back
Top