Newbie watercooling question

Joined
Jul 31, 2005
Messages
997
What are all the parts I need to setup a watercooling system for a CPU and a GPU?

Do all blocks/pumps/etc work together? Like plugging an AGP card into an AGP slot?
 
your best bet is to get this moved over to the overclocking and cooling section.

You'd need Water blocks for all componets, a pump, radiatior, and res for sure.

Some kits intergrate all the stuff. I've never water cooled but i assume parts will work together as long as the tubing sizes match (1/4", 3/8" or 1/2")
 
After the mod moves this to the WC you'll get more in-depth answers, but here's the basic info:

The minimum you'll need is a pump, radiator plus a fan or two, CPU block, GPU block, and tubing. You'll also need either a T line or reservoir to help bleed the air bubbles out, and some coolant (although technically you can use straight distilled water). Different componenets have different performance characteristics, so be sure to read some reviews. As an example, you can get a pump that pushes 100L/hr or one that pushes 600L/hr. Depending on how your system is configured the lower flow pump might perform better due to restriction, daisy-chaining, head pressure, etc., or you might see a huge benefit to using the higher flow pump depending on your components, or they might just perform pretty much the same. Unfortunately, it's not as easy as putting a jigsaw puzzle together and then looking at the pretty picture you just made.

The other important factor is to make sure everything uses the same size fittings. The two most common sizes for DIY are 3/8" and 1/2", and 1/4" is also popular with some all-in-one kits (mainly Koolance).

Your best bet as a WC rookie is to get a good pre-configured kit. That way, you know all of the components are designed to work together. Swiftech and Danger Den (you'll see people refer to them simply as DD) are popular, as is Koolance for certain applications, but there are others as well that would be suitable for a WC first timer.
 
Back
Top