newbie question/advice, help needed =]

aoX|qL

n00b
Joined
Jul 3, 2005
Messages
20
Hey guys, first time postin here so pls help :)

I own these items already:

3500venice
x800XL

I need help choosing the best mobo and ram for overclocking.

My friend will be doing the overclocking, he has suggested some parts, but I want your guy's opinion/advice :D.
Two motherboards come into mind;

MSI K8N Neo4 Platinum SLI Socket 939 NVIDIA nForce4 SLI ATX AMD
DFI LANPARTY nF4 SLI-DR Socket 939 NVIDIA nForce4 SLI ATX AMD

Is it really necessary to go with these motherboards for good overclocking?
I see the other models without the SLI feature..

DFI LANPARTY UT nF4 Ultra-D Socket 939 NVIDIA nForce4 Ultra ATX AMD
MSI K8N Neo4 Platinum Socket 939 NVIDIA nForce4 Ultra ATX AMD

Also I'll be using air to cool down the system,
Im going to upgrade from the stock heatsink and case fan.
Im trying to hit numbers as high as 2.6mhz; thats good enough for me ;)

Any suggestions/advice is welcome, Thanks guys!
 
i would say the lan party ultra d is hands down the best overclocker . the sli is the same.

howerer ASUS and the other makers make good overclocking MB also . they just can't quite reach those super high fsb. as well as the DFI nor do they have the extream v-dimmand v-core the DFI has--but that may or may not be important depending on how serious an overclocking attempt your going to make.

the DFI seems to have an advantage with a cpu that has a more "moderate overclocking core"

my asus with the crap core winchester 3000 would only do 2.45g stable--the DFI push the same core at the same v-core 1.57v to a stable 2.65g --and get this--the DFI had the crappy inferion budget ram-- the asus the much better pqi.

now with the venice 3200-- they overclock about the same-- 2.78g and thats it.

now i had a really good early winchester that could do 2.89g on air--with the asus

i wonder if the DFI could have pulled it above the magic 3.0 on air ?--anyways the limitation will be "how good the core is--with the asus for sure--the DFI might pull a bit higher--sometimes a bunch more--but it depends on the cpu-core --

the bad news about the DFI is yyou can get really greedy because it overclocks so well--and there are voltages in it that can kill stuff like ram-cpu's ect --so if you have a little brains about it--you'll be ok.get crazy--you'll be buying some new stuff!!

i did test my DFI and the asus FSB limits by underclocking the venice to 4x--the asus topped out at 365mhz and the DFI did 404MHZ and i think i could have tweeked a bit more out of the DFI--but i didn't have time to play .if the cpu and the rest of the stuff is up to it --the DFI has the most overclocking headroom.from what i have seen so far.
 
Thanks Rhino,
My friend will be doing to overclocking, So I just wanted a heads up on what mobo/ram I needed to get, my friend pointed me out in the same direction you said. So basically the lan party ultra d and the sli are totally the same? If so I'm going to go with the ultra d and save over about 70$+ haha.
Also what about ram? My friend said OCz EL platinum rev. 2, but im hearing some mixed reviews about it. Please suggest a ram that would be stable for my needs.

Thanks !! any more suggestions/advice about what mobo and ram to get would be awesome :cool:
 
any other suggestions guys?
please, any advice or help will really benefit me!
thanks =)
 
samsung TCCD's are good overclocking ram . can't say about ocz--but no reason it won't work with the dfi--if you have the correct updated bios.

one word of caution about the ultra D-- it has some high voltage options for v-dimm and v-core.

only use them unless your sure of what they will do because the is no safety margin on this MB to stop you from frying cpu's and ram-- the voltages are ok to use only if you have the proper type of ram and such.

i've been seeing some good overclocks on 1.57vcore and value ram type ram on air .as long as you pick the proper ram divisors.--so you don't have to have the expensive ram--unless you just want to overclock the ram as well. it will overclock ram better than any MB i know of--tccd's can hit ddr 600-- even 700

check over at rebels haven on their DFI page for more info on this MB and its overclocking results.
 
Hmm..
so would this be a good setup?

3500venice
lanparty nf4 ultra-d
mushkin redline xp4000
seasonic 430w
xp-90 + panaflo?
sum1 pls suggest a good heatsink and fan!

im just trying to get to 2.4mhz on air.
and if i can 2.6mhz.. that would be 'bomb-diggity'

as you can see, im trying to stay within this 800$ limit.
any suggestions are welcome, please help!
 
man 2.4+ on air is a walk in the park with either the ultra d or the asus.

as far as the ram goes--you don't have to have the $$$ stuff if you set the ram to run wither its rated speeds-- you might have to clock the ram to ddr 333--but with the increased FSB--you'll actually rave the ram going at 400+

if you ram holds up to high fsb you might make it going 1 to one on the RAM ratio

these guys running the tccd's and the overvoltage stuff are overclocking the CPU and the RAM-- but the DFI and the ASUS --you can overclock just the cpu--and set the ram to where it is not overclocked much at all-

one thing the ultra D has -- it has more divisors on the ram speeds 9esp with bios 618 and up)

just make sure to set the hyperthread down a bit-- set the pci-lock (asus )--
overclocking --you just have to set everything--but the later bioses you can set some of the ram stuff on auto

but your system looks good to me. the seasonic 430--i can't say as i have been useing antec's- the smallest antec i use is a 450sl - the 450sl has pulled two 6600gt's in sli. i am running 6800gt's in the asus and a x800pro/softmod to xt in the lanparty.

the x800xl uses a little less juice tham my x800pro/tx-- i'm running a 24pin converter on it--everybody says thats a no-no--but so far it's been working fine.--my asus running the 6800gt's in sli--it has an antec 550 with the adjustable rails--been running for almost a year--yea another 24 pin converter--lol-- no prpblems with the voltage at all.

the 430 seasonic could work--it looks to be right on the borderline of not being enough--so if you have problems--that would be a place to look--i think you'll be ok--if the quality of the power the seasonic is making is "clean"enough. otherwords a 450 generic--adaptor or no is going to have problems-native 24pin--but generic?--more problems.

-if you have to get a new PSU a antec 480TP with the native 24 pin would be the best pick- or something along those lines 450-550w -IMHO.


the xp-90 is fine or the 120--is also good.

now here is a inexpensive HS&F to at least consider
coolermaster hyper 6

big tall copper HS-fan --very heavy--adjustable fan-- there is a guy selling last yeas model for $25 shipping and all on ebay-- .i got one it it works great on my DFI and the fan exausts in just the right spot for my 120mm case fan to pull extra heat out.

if you move the computer alot--you might want to go with the xp90 though--it is much lighter--this hyper6 is so heavy--if you dropped the case with the heatsink attached--it might break the MB ! it is a great cooler for the $$ though.
 
thanks rhino for the suggestions,

i need to hear from different people also please!
 
any more suggestions guys?
i wana hear wat Eclipse has to say!? haha
or anyone else, ur comment will be valued please!
 
Back
Top