New upgrades

umin18

Weaksauce
Joined
Jul 30, 2005
Messages
66
Im upgrading my computer with an intel c2d 6400, 2gb of ddr pc2 6400, Msi p6n sli-fi, and thermaltake 500w psu, evga 8800gts 320mb. I was wondering how much I can oc the parts on this setup without pushing it too hard. I wont have a computer to look up information so when I set up my bios, I want to get my Bios right the first time I do it. Can anyone suggest what to set my bios settings at to get decent oc but not too much. I was hoping to reach 3.0 to 3.2 mhz on my cpu with stock fan until I can save up some money to replace the heatsink/fan with a tuniq tower or a zalman/or ninja. I also do not have the slightest clue on how to oc my ram or cpu. Any info or directions to information on how to set up bios for nubs like me who dont have the slightest clue or idea about what timing and volts and multipliers do?
 
check the overclocking stickies, or use the search button. theres a lot of really good info here, especially for your chip, seeing as how it tends to be a very good clocker.

Overclocking is done gradually. when you run into instability that isn't voltage or temp related, you'll know you've hit your limit. yrmv, there is not set 'max' oc for each chip.
 
If overclocking is done gradually, does that mean I can change the bios setting over and over again to test different settings even after I've installed windows xp? Do you know how I would go about doing this?
 
thats exactly it. in fact a lot of people now use programs from within windows to change multi and fsb settings since its easier and faster (like clockgen).

your bios is different from everyone elses, I can't tell you exactly which options and menus to go into, you'll need to read your mobo manual and any of the OC guides already posted here.
 
Back
Top